HP Designjet H45000 HP Designjet H35000 and H45000 Printer Series - 3M Light C - Page 4
Physical And Chemical Properties
View all HP Designjet H45000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
3M MATERIAL SAFETY DATA SHEET 3M Light Cyan Inkjet Ink 5486 03/12/2007 8.2.1 Eye/Face Protection Avoid eye contact with vapors, mists, or spray. The following eye protection(s) are recommended: Safety Glasses with side shields, Indirect Vented Goggles. 8.2.2 Skin Protection Avoid skin contact. Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible materials. Gloves made from the following material(s) are recommended: Nitrile Rubber. 8.2.3 Respiratory Protection Avoid breathing of vapors, mists or spray. Select one of the following NIOSH approved respirators based on airborne concentration of contaminants and in accordance with OSHA regulations: Half facepiece or fullface air-purifying respirator with organic vapor cartridges. Consult the current 3M Respiratory Selection Guide for additional information or call 1-800-243-4630 for 3M technical assistance. 8.2.4 Prevention of Swallowing Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water. 8.3 EXPOSURE GUIDELINES Ingredient 1,6-HEXANEDIOL DIACRYLATE BENZOPHENONE COPPER COMPOUNDS Authority AIHA AIHA ACGIH COPPER COMPOUNDS ISOOCTYL ACRYLATE ISOOCTYL ACRYLATE TETRAHYDROFURFURYL ACRYLATE TETRAHYDROFURFURYL ACRYLATE OSHA 3M AIHA 3M 3M Type Limit TWA 1 mg/m3 TWA 0.5 mg/m3 TWA, as Cu dust or 1 mg/m3 mist TWA, as dust or mist 1 mg/m3 TWA 5 ppm TWA 5 ppm TWA 0.1 ppm STEL 0.3 ppm Additional Information Sensitizer Table Z-1A SOURCE OF EXPOSURE LIMIT DATA: ACGIH: American Conference of Governmental Industrial Hygienists CMRG: Chemical Manufacturer Recommended Guideline OSHA: Occupational Safety and Health Administration AIHA: American Industrial Hygiene Association Workplace Environmental Exposure Level (WEEL) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Specific Physical Form: Odor, Color, Grade: General Physical Form: Autoignition temperature Flash Point Flammable Limits - LEL Flammable Limits - UEL Boiling point Density Vapor Density Vapor Pressure Liquid Acrylate Odor, Cyan Color Liquid No Data Available > 200 ºF [Test Method: Closed Cup] No Data Available No Data Available > 200 ºF 1.04 g/ml > 1 [Ref Std: AIR=1] < 10 mmHg [@ 20 ºC] Page 4 of 7