HP Designjet H45000 HP Designjet H35000 and H45000 Printer Series - 3M Thinner
HP Designjet H45000 - Commercial Printer Manual
 |
View all HP Designjet H45000 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Designjet H45000 manual content summary:
- HP Designjet H45000 | HP Designjet H35000 and H45000 Printer Series - 3M Thinner - Page 1
PRODUCT NAME: 3M(TM) Thinner CGS-80 MANUFACTURER: 3M DIVISION: Commercial Graphics ADDRESS: 3M Center St. Paul, MN 55144-1000 EMERGENCY Date: 02/20/2004 Document Group: 11-0346-4 Product Use: Specific Use: Solvent for Cleaning and Thinning SECTION 2: INGREDIENTS Ingredient DIETHYLENE GLYCOL - HP Designjet H45000 | HP Designjet H35000 and H45000 Printer Series - 3M Thinner - Page 2
medical attention. Inhalation: Remove person to fresh air. If signs/symptoms develop, get medical attention. If Swallowed: Do not induce vomiting unless instructed to do so by medical personnel. Give victim two glasses of water. Never give anything by mouth to an unconscious person. Get immediate - HP Designjet H45000 | HP Designjet H35000 and H45000 Printer Series - 3M Thinner - Page 3
edges of the spill inward, cover with bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient absorbent until it appears AND STORAGE 7.1 HANDLING Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water. Avoid - HP Designjet H45000 | HP Designjet H35000 and H45000 Printer Series - 3M Thinner - Page 4
respirator with organic vapor cartridges. Consult the current 3M Respiratory Selection Guide for additional information or call 1-800-243-4630 for 3M technical 8.2.4 Prevention of Swallowing Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water. 8.3 - HP Designjet H45000 | HP Designjet H35000 and H45000 Printer Series - 3M Thinner - Page 5
FATE INFORMATION Not determined. SECTION 13: DISPOSAL CONSIDERATIONS Waste Disposal Method: Reclaim if feasible. Incinerate in an industrial or commercial facility in the presence of a combustible material. As a disposal alternative, dispose of waste product in a facility permitted to accept - HP Designjet H45000 | HP Designjet H35000 and H45000 Printer Series - 3M Thinner - Page 6
Chemicals subject to the reporting requirements of that section and 40 CFR part 372 (EPCRA): Ingredient DIETHYLENE GLYCOL MONOETHYL ETHER ACETATE (GLYCOL ETHERS) Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are - HP Designjet H45000 | HP Designjet H35000 and H45000 Printer Series - 3M Thinner - Page 7
the 3M product to determine whether it is fit for a particular purpose and suitable for user's method of use or application. 3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may have resulted in errors, omissions or
-
1 -
2 -
3 -
4 -
5 -
6 -
7
 |
 |
3M MATERIAL SAFETY DATA SHEET
3M(TM) Thinner CGS-80
10/21/2005
_________________________________________________________________________________________________
Page
1
of
7
Material Safety Data Sheet
Copyright, 2005, 3M Company.
All rights reserved.
Copying and/or downloading of this information for the purpose of properly
utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is
obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit
thereon.
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME:
3M(TM) Thinner CGS-80
MANUFACTURER:
3M
DIVISION:
Commercial Graphics
ADDRESS:
3M Center
St. Paul, MN
55144-1000
EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)
Issue Date:
10/21/2005
Supercedes Date:
02/20/2004
Document Group:
11-0346-4
Product Use:
Specific Use:
Solvent for Cleaning and Thinning
SECTION 2: INGREDIENTS
Ingredient
C.A.S. No.
% by Wt
DIETHYLENE GLYCOL MONOETHYL ETHER ACETATE
112-15-2
100
SECTION 3: HAZARDS IDENTIFICATION
3.1
EMERGENCY OVERVIEW
Specific Physical Form:
Liquid
Odor, Color, Grade:
Solvent Odor, Clear Color
General Physical Form:
Liquid
Immediate health, physical, and environmental hazards:
May cause target organ effects.
3.2
POTENTIAL HEALTH EFFECTS
Eye Contact:
Mild Eye Irritation: Signs/symptoms may include redness, pain, and tearing.
Skin Contact: