HP Designjet H45000 HP Designjet H35000 and H45000 Printer Series - 3M Thinner - Page 4

3M MATERIAL SAFETY DATA SHEET 3M(TM) Thinner CGS-80 10/21/2005 8.2.2 Skin Protection Avoid skin contact. Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible materials. Gloves made from the following material(s) are recommended: Butyl Rubber. 8.2.3 Respiratory Protection Avoid breathing of vapors, mists or spray. Select one of the following NIOSH approved respirators based on airborne concentration of contaminants and in accordance with OSHA regulations: Half facepiece or fullface air-purifying respirator with organic vapor cartridges. Consult the current 3M Respiratory Selection Guide for additional information or call 1-800-243-4630 for 3M technical assistance. 8.2.4 Prevention of Swallowing Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water. 8.3 EXPOSURE GUIDELINES None Established SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Specific Physical Form: Odor, Color, Grade: General Physical Form: Autoignition temperature Flash Point Flammable Limits - LEL Flammable Limits - UEL Boiling point Density Vapor Density Vapor Pressure Specific Gravity pH Melting point Solubility in Water Volatile Organic Compounds Percent volatile VOC Less H2O & Exempt Solvents Liquid Solvent Odor, Clear Color Liquid 680 ºF 211 ºF [Test Method: Closed Cup] 0.9 % 19.4 % 423 ºF 1.01 g/ml > 1 [Ref Std: AIR=1] 0.05 mmHg [@ 20 ºC] 1.01 [Ref Std: WATER=1] Not Applicable Not Applicable Complete 1,010 g/l 100 % 1,010 g/l SECTION 10: STABILITY AND REACTIVITY Stability: Stable. Materials and Conditions to Avoid: Strong oxidizing agents Page 4 of 7