HP Designjet T770 HP Designjet T770 & T1200 Printer Series - Introductory - Page 4
PDL Error: Job clipped - load paper every time i print
View all HP Designjet T770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Message or code Recommendation [Color] printhead #[n] error: not Insert the correct printhead. present [Color] printhead #[n] error: please remove Remove the incorrect printhead and insert a new printhead of the correct type (color and number). [Color] printhead #[n] error: replace Remove the non-functional printhead and insert a new printhead. [Color] printhead #[n] error: reseat Remove and reinsert the same printhead, or try cleaning the electrical connections. If necessary, insert a new printhead. [Color] printhead #[n] out of warranty The printhead's warranty has expired, because of the length of time it has been in operation or because of the volume of ink used. [Color] printhead #[n] warranty The printhead's warranty may be invalidated by the use of the wrong kind of warning ink. IO error Restart the printer. If the problem persists, contact HP Support. IO warning Try again; if the problem persists, contact HP Support. Paper advance calibration pending Perform paper advance calibration. Paper too small to print paper advance calibration Unload paper and load larger paper. Paper too small to scan paper advance calibration Unload paper and load larger paper. PDL Error: Ink system not ready Clean the printheads. PDL Error: Job clipped The image is too large for the paper or for the printer. Load larger paper if possible, or reduce the image size. PDL Error: memory full Restart the printer and try resending the job; if necessary, reduce the complexity of the job. PDL Error: out of paper Load more paper. PDL Error: parsing error The print job is unintelligible to the printer. Try to recreate and resend it. Check your cable connections. PDL Error: print mode error The paper type or print quality specified for the job are incorrect. Change the loaded paper type or the print settings. PDL Error: printing error Try sending the job again. PDL Error: virtual memory full Restart the printer and try resending the job; if necessary, reduce the complexity of the job. Printhead alignment error: paper too small Unload paper and load larger paper. Replace [color] cartridge Replace the cartridge. Reseat [color] cartridge Remove and reinsert the same cartridge. Update: failed. Invalid file Make sure that you have selected the correct firmware update file. Then try again to perform the update. 01.0, 01.1, 01.2 Restart the printer. If the problem persists, contact HP Support. 21, 21.1, 22.0, 22.1, 22.2, 22.3, 24 Restart the printer. If the problem persists, contact HP Support. 3 Introductory Information