HP Deskpro /M Desktop PC 486/66M Deskpro Personal Computers Service Reference - Page 72
Network Problem
View all HP Deskpro /M Desktop PC 486/66M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Network Problem Continued Problem Network controller stopped working when an expansion board was added to the computer. Possible Solution 1. Network drivers are not loaded or driver parameters do not match the current configuration. Make sure that the drivers are loaded and that the driver parameters match the configuration of the network controller. 2. The cable is not securely connected or is attached incorrectly. Ensure that the cable is securely attached to the network connector and that the other end of the cable is securely attached to the correct device. 3. Network controller interrupt is shared with an expansion board. Under the Computer Setup Advanced menu, change the resource settings for the board. 4. Network drivers were accidentally deleted when the drivers for the new expansion board were installed, or the files containing the network drivers are corrupted. Reinstall the network drivers, using backup diskettes. Network controller stopped working without apparent cause. 1. The files containing the network drivers are corrupted. Reinstall the network drivers, using backup diskettes. 2. The cable is not securely connected or is attached incorrectly. Ensure that the cable is securely attached to the network connector and that the other end of the cable is securely attached to the correct device. 3. The network controller is defective. Replace the network controller or system board. Cannot connect to the network server when attempting Remote System Installation. The network controller is not configured properly. Run Computer Setup and modify the Embedded NIC Settings. Deskpro Service Reference Guide F-11