HP Deskpro /M Desktop PC 486s/16M Compaq Deskpro Family of Personal Computers, - Page 64
POST Error Messages, A DIMM module in DIMM
View all HP Deskpro /M Desktop PC 486s/16M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
POST Error Messages Continued Screen Message 212-Failed Processor Beeps* None Probable Cause Processor has failed to initialize. Recommended Action 1. Reseat the processor in its socket. 2. If the processor does not respond, replace it. 213-Incompatible DIMM 2S Module in DIMM Socket(s) X,X A DIMM module in DIMM socket identified in the error message is missing critical SPD information, or is incompatible with the chipset. 1. Verify proper memory module type. 2. Try another memory socket. 3. Replace DIMM with a module conforming to the SPD standard. 214-Memory Device Failure. Error Code: XX Memory Module Socket(s):XX None A specific error has occurred 1. Verify proper memory module in a RDRAM device installed type. in the identified socket. 2. Try another memory socket. 3. Replace memory module if problem persists. 301-Keyboard Error None Keyboard failure. 1. Reconnect keyboard with computer turned off. 2. Check connector for bent or missing pins. 3. Ensure that none of the keys are depressed. 4. Replace keyboard. 304-Keyboard or System Unit Error None Keyboard failure. 1. Reconnect the keyboard with computer turned off. 2. Ensure that none of the keys are depressed. 3. Replace keyboard. 4. Replace system board. 401-Parallel Port 1 Address 2S Assignment Conflict IRQ address conflicts with another device. Reset the IRQ. 403-Parallel Port 3 Address 2S Assignment Conflict IRQ address conflicts with another device. Reset the IRQ. 404-Parallel Port Address 2S Conflict Detected * L = Long, S = Short Both external and internal ports are assigned to parallel port X. 1. Remove any parallel expansion cards. 2. Clear CMOS. 3. Reconfigure card resources and/or run Computer Setup (F10 Setup). continued Quick Troubleshooting Guide B-3