HP DreamColor Z24x User Guide - Page 30
locked in place.
View all HP DreamColor Z24x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
4. Install the mounting plate to the wall or swing arm of your choice using the four screws that were removed from the VESA holes on the rear of the monitor panel. 5. Place the monitor panel on the mounting bracket you've installed by aligning its recess with the mounting bracket, then sliding it down over the top of the bracket and pressing it back into place against the bracket. The release latch on the monitor will pop up when the monitor is safely locked in place. 22 Chapter 3 Setting Up the Monitor
4.
Install the mounting plate to the wall or swing arm of your choice using the four screws that were
removed from the VESA holes on the rear of the monitor panel.
5.
Place the monitor panel on the mounting bracket you've installed by aligning its recess with the
mounting bracket, then sliding it down over the top of the bracket and pressing it back into place
against the bracket. The release latch on the monitor will pop up when the monitor is safely
locked in place.
22
Chapter 3
Setting Up the Monitor