HP Dv5 1002us Service Guide - Page 82
Speaker assembly, Disconnect the speaker assembly cable
UPC - 884420236689
View all HP Dv5 1002us manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Speaker assembly Description Speaker assembly Spare part number 486801-001 Before removing the speaker assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 52). 5. Remove the switch cover and keyboard (see Switch cover and keyboard on page 69). Remove the speaker assembly: 1. Disconnect the speaker assembly cable (1) from the system board. 2. Remove the speaker assembly cable from the clips (2) in the top cover. 3. Remove the speaker assembly (3). Reverse this procedure to install the speaker assembly. 74 Chapter 4 Removal and replacement procedures