HP Dv6 1240us Service Guide - Page 75
Power button board, Remove the Phillips PM2.5×4.0 screw
UPC - 884962256473
View all HP Dv6 1240us manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Power button board Description Power button board (includes cable) Spare part number 512834-001 Before removing the power button board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC Adapter from the computer. 4. Remove the battery (see Battery on page 48). 5. Remove the switch cover and keyboard (see Switch cover and keyboard on page 63). Remove the power button board: 1. Turn the switch cover upside down with the front toward you. 2. Remove the Phillips PM2.5×4.0 screw (1) that secures the power button board to the switch cover. 3. Remove the power button board (2) and cable. Reverse this procedure to install the power button board. Component replacement procedures 67