HP Dv9650us HP Pavilion dv9500, dv9600, and dv9700 Entertainment PCs - Mainten - Page 111
before the fan/heat sink assembly is reinstalled. Thermal material is included with all fan/heat sink
UPC - 883585486304
View all HP Dv9650us manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
4. Remove the fan/heat sink assembly (3). NOTE: Due to the adhesive quality of the thermal material located between the fan/heat sink assembly and system board components, it may be necessary to move the fan/heat sink assembly from side to side to detach the assembly. NOTE: The thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink assembly (1), (2), and (3), the system board components (4) and (6), and the processor (5) each time the fan/heat sink assembly is removed. Thermal material must be installed on all surfaces before the fan/heat sink assembly is reinstalled. Thermal material is included with all fan/heat sink assembly, system board, and processor spare part kits. 5. If it is necessary to replace the heat sink, loosen the two Phillips PM2.5×4.0 captive screws (1) that secure the heat sink to the system board. Component replacement procedures 101