HP Dx2400 Computer Setup (F10) Utility Guide - Page 8
Caution - smart 2 0
UPC - 884962251881
View all HP Dx2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
● Boot ● Exit Use the arrow keys to select the appropriate heading, then press Enter. Use the arrow (up and down) keys to select the option you want, then press Enter. To return to the previous screen, press Esc. CAUTION: Do NOT turn the computer power OFF while the ROM is saving the Computer Setup (F10) changes because the CMOS could become corrupted. It is safe to turn off the computer only after exiting the F10 Setup screen. Computer Setup-Main NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration. Table 1 Computer Setup-Main Option Description System Time Allows you to set system time. System Date Allows you to set system date. Language Allows you to select language. Floppy Diskette A: Allows you to set drive A to: ● Disabled ● 1.44 MB 3.5" ● Not Installed 1st Drive For each, allows you to: 2nd Drive ● (view only) 3rd Drive ◦ Capacity (Size - HDD only) 4th Drive ◦ Transfer Mode ◦ SATA Speed ◦ NCQ ● Smart Support - run HDD self-test for selected channel: ◦ SMART Status Check ◦ SMART Short Self-Test ◦ SMART Extended Self-Test System Information (view only) ● Installed Memory ● Memory Bank 1 ● Memory Bank 2 ● Memory Bank 3 2 Computer Setup (F10) Utility ENWW