HP E27q User Guide - Page 15
Connecting the cables
View all HP E27q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Connecting the cables NOTE: Depending on the model, the monitor may be capable of supporting VGA, HDMI, or DisplayPort inputs. The video mode is determined by the video cable used. The monitor automatically determines which inputs have valid video signals. The inputs can be selected through the OSD menu. The monitor ships with select cables. Not all cables shown in this section are included with the monitor. 1. Place the monitor in a convenient, well-ventilated location near the computer. 2. Connect a video cable. ● Connect one end of a VGA cable to the VGA port on the rear of the monitor and the other end to the VGA port on the source device. ● Connect one end of a DisplayPort cable to the DisplayPort connector on the rear of the monitor and the other end to the DisplayPort connector on the source device. Setting up the monitor 9