HP ENVY 14-1100 HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 81

CAUTION, Remove the four Phillips PM2.5×4.0 screws

Get HP ENVY 14-1100 - Beats Edition Notebook PC PDF manuals and user guides View all HP ENVY 14-1100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 81 highlights

6. Detach the wireless antenna cables (4) from the routing channel built into the base enclosure. (The wireless antenna cables are attached to the base enclosure with double-sided tape.) 7. Release the wireless antenna cables (1) from the opening (2) in the base enclosure. 8. Disconnect the display panel cable (3) from the system board. CAUTION: Support the display assembly when removing the following screws. Failure to support the display assembly can result in damage to the display assembly and other computer components. 9. Remove the four Phillips PM2.5×4.0 screws (4) that secure the display assembly to the computer. 10. Remove the display assembly (5). Reverse this procedure to reassemble the display assembly. Component replacement procedures 71

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
6.
Detach the wireless antenna cables
(4)
from the routing channel built into the base enclosure.
(The wireless antenna cables are attached to the base enclosure with double-sided tape.)
7.
Release the wireless antenna cables
(1)
from the opening
(2)
in the base enclosure.
8.
Disconnect the display panel cable
(3)
from the system board.
CAUTION:
Support the display assembly when removing the following screws. Failure to
support the display assembly can result in damage to the display assembly and other computer
components.
9.
Remove the four Phillips PM2.5×4.0 screws
(4)
that secure the display assembly to the
computer.
10.
Remove the display assembly
(5)
.
Reverse this procedure to reassemble the display assembly.
Component replacement procedures
71