HP ENVY 14t-1000 HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 51
that secure the bracket to the mass storage device., Remove the mass storage device
View all HP ENVY 14t-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Remove the mass storage device: 1. Remove the four Phillips PM2.0×3.0 screws that secure the mass storage device to the computer. 2. Use the Mylar tab (1) to slide the mass storage device to the right and disconnect it from the system board. 3. Lift the mass storage device (2) out of the mass storage device bay. 4. If it is necessary to replace the mass storage device bracket, remove the four Phillips PM3.0×3.0 screws (1) that secure the bracket to the mass storage device. 5. Remove the mass storage device bracket (2). The mass storage device bracket and screws are included in the Hard Drive Hardware Kit, spare part number 608373-001. Component replacement procedures 43
Remove the mass storage device:
1.
Remove the four Phillips PM2.0×3.0 screws that secure the mass storage device to the computer.
2.
Use the Mylar tab
(1)
to slide the mass storage device to the right and disconnect it from the
system board.
3.
Lift the mass storage device
(2)
out of the mass storage device bay.
4.
If it is necessary to replace the mass storage device bracket, remove the four Phillips PM3.0×3.0
screws
(1)
that secure the bracket to the mass storage device.
5.
Remove the mass storage device bracket
(2)
. The mass storage device bracket and screws are
included in the Hard Drive Hardware Kit, spare part number 608373-001.
Component replacement procedures
43