HP ENVY 17-3270nr HP ENVY 17 - Maintenance and Service Guide - Page 83
services it, Thermal paste is used on the graphics subsystem chip
View all HP ENVY 17-3270nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
NOTE: The thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink assembly and the system board components each time the fan/heat sink assembly is removed. Replacement thermal material is included with the fan/heat sink assembly and system board spare part kits. The following illustration shows the replacement thermal material locations. ● Thermal paste is used on the processor (1) and the heat sink section (2) that services it ● Thermal paste is used on the graphics subsystem chip (3) and the heat sink section (4) that services it ● Thermal pads are used on the system board capacitors (5) and the heat sink sections (6) that service them ENWW Component replacement procedures 75
NOTE:
The thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink
assembly and the system board components each time the fan/heat sink assembly is removed.
Replacement thermal material is included with the fan/heat sink assembly and system board spare
part kits. The following illustration shows the replacement thermal material locations.
●
Thermal paste is used on the processor
(1)
and the heat sink section
(2)
that services it
●
Thermal paste is used on the graphics subsystem chip
(3)
and the heat sink section
(4)
that
services it
●
Thermal pads are used on the system board capacitors
(5)
and the heat sink sections
(6)
that
service them
ENWW
Component replacement procedures
75