HP ENVY Sleekbook 4-1000 HP Envy 6 Maintenance and Service Guide - Page 56
System board, Remove the 2 Phillips PM screws
View all HP ENVY Sleekbook 4-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Remove the fan: 1. Disconnect the fan cable (1). 2. Remove the 2 Phillips PM screws (2) securing the fan to the unit, and then lift the fan upwards (3). 3. Remove the piece of tape on the underside of the heat sink that secures the fan to the unit (4). System board NOTE: The system board spare part kit includes replacement thermal material. Description Spare part number For use only with computer models equipped with an Intel 1.8GHz processor, but not WWAN capability (includes replacement thermal material) 693228-001 For use only with computer models equipped with an Intel 1. 8GHz processor but not WWAN capability (includes replacement thermal material) 693228-501 For use only with computer models equipped with an Intel 1.8GHz processor, but not WWAN capability (includes replacement thermal material) 693228-601 For use only with computer models equipped with an Intel 1.7GHz processor, but not WWAN capability (includes replacement thermal material) 693229-001 For use only with computer models equipped with an Intel 1.7GHz processor, but not WWAN capability (includes replacement thermal material) 693229-501 For use only with computer models equipped with an Intel 1.7GHz processor (includes replacement 693229-601 thermal material) For use only with computer models equipped with an Intel 1.4GHz processor (includes replacement 693230-001 thermal material) 48 Chapter 4 Removal and replacement procedures