HP ENVY Ultrabook 4-1000 HP Envy 4 - Maintenance and Service Guide - Page 65
Power connector cable, Remove the USB/Audio board
View all HP ENVY Ultrabook 4-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Remove the USB/Audio board: 1. Disconnect the USB/Audio board cable from the system board (1) 2. Disconnect the Phillips PM 2.0x2.0 screw securing the USB/Audio board (2). 3. Remove the USB/Audio board (3). Power connector cable Description Power connector cable (includes bracket) Spare part number 686577-001 Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the display panel (see Display panel on page 31). 5. Remove the base enclosure (see Base enclosure on page 33). 6. Disconnect the battery cable (see Battery on page 35). 7. Remove the subwoofer (see Subwoofer on page 54). Component replacement procedures 57