HP ENVY x2 - 15-c001xx HP ENVY x2 Detachable PC Maintenance and Service Guide - Page 46
POGO board, from the board.
View all HP ENVY x2 - 15-c001xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
POGO board Description POGO board (includes cable) Spare part number 783103-001 Before removing the POGO board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Disconnect the tablet from the keyboard base (see Connecting the tablet to the keyboard base on page 28). 5. Remove the rear cover (see Rear cover on page 29). 6. Remove the battery (see Battery on page 35). To remove the POGO board: 1. Disconnect the cable (1) from the board. 2. Use small tool to pry the board (2) and rotate it up to disengage from adhesive, and then remove the board and cable from tablet (3). Reverse this procedure to install the POGO board. 36 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts