HP F761US HP G6000 Notebook PC and Compaq Presario F700 Notebook PC - Maintena - Page 83
Setup Utility, Starting the Setup Utility, Changing the language of the Setup Utility
UPC - 883585866533
View all HP F761US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
5 Setup Utility WARNING! Only authorized technicians trained by HP must repair this equipment. All troubleshooting and repair procedures are detailed to allow repair at only the subassembly or module level. Because of the complexity of the individual boards and subassemblies, do not attempt to make repairs at the component level or modify any printed wiring board. Improper repairs can create a safety hazard. Any indication of component replacement or printed wiring board modification may void any warranty or exchange allowances. Starting the Setup Utility The Setup Utility is a ROM-based information and customization utility that can be used even when your Windows operating system is not working or will not load. NOTE: The fingerprint reader (select models only) does not work when accessing the Setup Utility. The utility reports information about the computer and provides settings for startup, security, and other preferences. To start the Setup Utility: 1. Turn on or restart the computer. 2. Before Windows opens and while "Press to enter setup" is displayed in the lower-left corner of the screen, press f10. Changing the language of the Setup Utility The following procedure explains how to change the language of the Setup Utility. If the Setup Utility is not already running, begin at step 1. If the Setup Utility is already running, begin at step 2. 1. To start the Setup Utility, turn on or restart the computer, and then press f10 while "Press to enter setup" is displayed in the lower-left corner of the screen. 2. Use the arrow keys to select System Configuration > Language, and then press enter. 3. Press f5 or f6 (or use the arrow keys) to select a language, and then press enter to select a language. 4. When a confirmation prompt with your preference selected is displayed, press enter to save your preference. 5. To set your preferences and exit the Setup Utility, press f10 and then follow the instructions on the screen. Your preferences go into effect when the computer restarts in Windows. Starting the Setup Utility 75