HP FDDI 9000 FDDI/9000 HSC Adapter Release Notes for HP-UX - Page 7
Operating Environment
View all HP FDDI 9000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
and must be furnished by the customer. For existing installations that use cables with MIC (Media Interface Connector) connectors, SC to MIC cable adapter cables must be ordered by specifying "Option 001". WARNING Never look directly into an optical fiber port. While not used or supported by this adapter, some fiber optic equipment can emit laser light that can injure your eyes. Always assume the cable is connected to a light source. Optical Bypass Relay Connection The Optical Bypass Relay (OBR) connector allows the OBR device to maintain integrity of the dual FDDI rings if the adapter fails or if system power is removed. The OBR connector is an RJ-12 modular jack connector. The pin assignments (counting from right to left, with pin 1 in the rightmost position) are described in the list below. WARNING Do not insert telecommunications cabling into the optical bypass relay connector. OBR RJ-12 Connector Pin Assignments Pin 1, 2: Relay drive +5.0 V dc Pin 3, 4: Bypass enable Pin 5: Bypass present Pin 6: Return grounded internally Operating Environment The list below shows the recommended operating environment for the HSC-FDDI Dual Attach Adapter. Operating Environment Operating Temperature Range: 5 to 30 degrees C Non-operating Temperature Range: -40 to 70 degrees C Recommended Operating Temperature Range: 20 to 30 degrees C 7