HP FN015UT Compaq 615 Notebook PC and Compaq 610 Notebook PC - Maintenance and - Page 58
by pulling the module away from the slot at an angle
UPC - 884962591895
View all HP FN015UT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Removal and replacement procedures 4. Disconnect the WLAN antenna cables 1 from the terminals on the WLAN module. ✎ The black WLAN antenna cable is connected to the WLAN module "Main" terminal. The white WLAN antenna cable is connected to the WLAN module "Aux" terminal. 5. Remove the two Phillips PM2.5×4.0 screws 2 that secure the WLAN module to the computer. (The edge of the module opposite the slot rises away from the computer.) 6. Remove the WLAN module 3 by pulling the module away from the slot at an angle. ✎ WLAN modules are designed with a notch 4 to prevent incorrect insertion of the WLAN module into the WLAN module slot. Reverse this procedure to install the WLAN module. Maintenance and Service Guide 4-15
Removal and replacement procedures
Maintenance and Service Guide
4–15
4. Disconnect the WLAN antenna cables
1
from the terminals on the WLAN module.
✎
The black WLAN antenna cable is connected to the WLAN module “Main” terminal. The white WLAN
antenna cable is connected to the WLAN module “Aux” terminal.
5.
Remove the two Phillips PM2.5×4.0 screws
2
that secure the WLAN module to the computer. (The edge of the
module opposite the slot rises away from the computer.)
6. Remove the WLAN module
3
by pulling the module away from the slot at an angle.
✎
WLAN modules are designed with a notch
4
to prevent incorrect insertion of the WLAN module into
the WLAN module slot.
Reverse this procedure to install the WLAN module.