HP FS110UA#ABA HP G70 Notebook PC Compaq Presario CQ70 Notebook PC - Maintenan - Page 63
One Phillips PM2.0x6.0 screw
UPC - 884420383819
View all HP FS110UA#ABA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Removal and replacement procedures 5. Release the ZIF connector to which the TouchPad cable is attached, and disconnect the TouchPad cable from the system board. 6. Remove the following screws: a. Three Phillips PM2.5x9.0 screws 1 b. Two Phillips PM2.5x5.0 screws 2 c. One Phillips PM2.0x6.0 screw 3 7. Lift the rear edge of the top cover 1 until the top cover disengages from the base enclosure. 8. Remove the top cover 2. Reverse this procedure to install the top cover. Maintenance and Service Guide 4-27
Removal and replacement procedures
Maintenance and Service Guide
4–27
5. Release the ZIF connector to which the TouchPad cable is attached, and disconnect the TouchPad cable from
the system board.
6. Remove the following screws:
a.
Three Phillips PM2.5x9.0 screws
1
b.
Two Phillips PM2.5x5.0 screws
2
c.
One Phillips PM2.0x6.0 screw
3
7. Lift the rear edge of the top cover
1
until the top cover disengages from the base enclosure.
8. Remove the top cover
2
.
Reverse this procedure to install the top cover.