HP Folio 13-1029wm HP Folio 13 - Maintenance and Service Guide - Page 41
Power button board, Remove the Power button board and cable
View all HP Folio 13-1029wm manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Power button board Description Power button board Spare part number 672357-001 Before removing the Power button board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the base enclosure screws (see Base enclosure on page 27). 5. Remove the keyboard (see Keyboard on page 29). 6. Remove the top cover (see Top cover on page 31). 7. Disconnect the battery cable (see Battery on page 35). Remove the Power button board and cable: 1. Turn the top cover upside down, with the back edge toward you. 2. Remove the 2 Phillips PM 2.0x3x0 screws securing the Power button board to the top cover (1). 3. Remove the Power button board (2). NOTE: The Power button board's cable is attached to the board. Component replacement procedures 33