HP G50-100 HP G50 Notebook PC and Compaq Presario CQ50 Notebook PC - Maintenan - Page 82
System board, Battery, on Optical drive, Hard drive, Keyboard, Keyboard cover, Display assembly
View all HP G50-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Before removing the USB board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 40). 5. Remove the following components: a. Optical drive (see Optical drive on page 41) b. Hard drive (see Hard drive on page 43) c. Keyboard (see Keyboard on page 52) d. Keyboard cover (see Keyboard cover on page 54) e. Display assembly (see Display assembly on page 57) f. Top cover (see Top cover on page 64) g. Speakers (see Speakers on page 72) Remove the USB board: 1. Disconnect the USB board cable (1) from the system board. 2. Remove the num lock LED cable (2) from the light cover built into the base enclosure. 3. Remove the USB board (3) from the base enclosure. Reverse this procedure to install the USB board. System board NOTE: All system board spare part kits include UMA graphics subsystem memory, built-in modem, and replacement thermal material. 74 Chapter 4 Removal and replacement procedures