HP G50-219CA HP G50 Notebook PC and Compaq Presario CQ50 Notebook PC - Mainten - Page 91
Power connector cable, with the triangle
View all HP G50-219CA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
e. Display assembly (see Display assembly on page 57) f. Top cover (see Top cover on page 64) g. Speakers (see Speakers on page 72) h. System board (see System board on page 74) i. Fan/heat sink assembly (see Fan/heat sink assembly on page 79) Remove the processor: 1. Use a flat-bladed screwdriver to turn the processor locking screw (1) one-half turn counterclockwise until you hear a click. 2. Lift the processor (2) straight up and remove it. NOTE: When you install the processor, the gold triangle (3) on the processor must be aligned with the triangle (4) embossed on the processor socket. Reverse this procedure to install the processor. Power connector cable Description Power connector cable Spare part number 486637-001 Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. Component replacement procedures 83