HP G60-120CA Service Guide - Page 86
Lift the processor, hear a click.
View all HP G60-120CA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
g. Display assembly (see "Display assembly" on page 4-23) h. Top cover (see "Top cover" on page 4-30) i. Bluetooth module (see "Bluetooth module" on page 4-35) j. System board (see "System board" on page 4-38) k. Fan/heat sink assembly (see "Fan/heat sink assembly" on page 4-41) Remove the processor: 1. Use a flat-bladed screwdriver to turn the processor locking screw 1 one-half turn counterclockwise until you hear a click. 2. Lift the processor 2 straight up and remove it. ✎ When you install the processor, the gold triangle on the processor 3 must be aligned with the triangle embossed on the processor slot 4. Reverse this procedure to install the processor. Removal and replacement procedures 4-45
Removal and replacement procedures
4–45
g.
Display assembly (see
“Display assembly” on page 4-23
)
h.
Top cover (see
“Top cover” on page 4-30
)
i.
Bluetooth module (see
“Bluetooth module” on page 4-35
)
j.
System board (see
“System board” on page 4-38
)
k.
Fan/heat sink assembly (see
“Fan/heat sink assembly” on page 4-41
)
Remove the processor:
1. Use a flat-bladed screwdriver to turn the processor locking screw
1
one-half turn counterclockwise until you
hear a click.
2. Lift the processor
2
straight up and remove it.
✎
When you install the processor, the gold triangle on the processor
3
must be aligned with the triangle embossed
on the processor slot
4
.
Reverse this procedure to install the processor.