HP G62-200XX Service Guide - Page 74
TouchPad button board, Turn the top cover upside down with the front toward you.
View all HP G62-200XX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
TouchPad button board Description Touchpad button board Spare part number 595203-001 Before removing the TouchPad button board: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on the computer, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then disconnecting the AC adapter from the computer. 4. Remove the battery (see Battery on page 46). 5. Remove the following components: a. Hard drive (see Hard drive on page 47) b. Optical drive (see Optical drive on page 50) c. Keyboard (see Keyboard on page 57) d. Top cover (see Top cover on page 59) Remove the TouchPad button board: 1. Turn the top cover upside down with the front toward you. 2. Remove the two Phillips PM2.0×3.0 screws (1) that secure the TouchPad board to the top cover. 3. Lift up and remove the touchpad button board (2) from the TouchPad bracket. Reverse the above procedure to reassemble and install the TouchPad button board. 64 Chapter 4 Removal and replacement procedures ENWW