HP G72-100 HP G72 Notebook PC - Maintenance and Service Guide - Page 67
and disengage the cables from the clip in, the routing channel leading to the display hinge
View all HP G72-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Removal and replacement procedures To remove the display assembly: 1. Disconnect the display panel cable 1, and then disconnect the microphone cable 2 from the system board and remove the cable from its routing channel. 2. Pull the antenna cables through the opening in the base enclosure 3 and disengage the cables from the clip in the routing channel leading to the display hinge 4. 3. Disconnect the webcam cable 5 from the system board and release it from the clips that attach it to the system board. Maintenance and Service Guide 4-29
Removal and replacement procedures
Maintenance and Service Guide
4–29
To remove the display assembly:
1. Disconnect the display panel cable
1
, and then disconnect the microphone cable
2
f
rom the system board and
remove the cable from its routing channel.
2. Pull the antenna cables through the opening in the base enclosure
3
and disengage the cables from the clip in
the routing channel leading to the display hinge
4
.
3. Disconnect the webcam cable
5
from the system board and release it from the clips that attach it to the system
board.