HP GbE2c HP GbE2c Ethernet Blade Switch for c-Class BladeSystem User Guide - Page 19
Accessing the switch
UPC - 808736802215
View all HP GbE2c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Installing the switch CAUTION: Do not cable the switch until after configuration. IMPORTANT: Make sure that the server NIC configuration matches the switch bay selected. NOTE: When installing two switches, there are two switch interconnect ports between adjacent I/O bays. These ports (17 and 18) are disabled by default. The ports must be manually enabled to use. To install the switch: 1. Remove the blank. 2. Install the switch. Accessing the switch The switch is accessed remotely using the Ethernet ports or locally using the DB-9 management serial port. Installing the switch 19
Installing the switch 19
Installing the switch
CAUTION:
Do not cable the switch until after configuration.
IMPORTANT:
Make sure that the server NIC configuration matches the switch bay selected.
NOTE:
When installing two switches, there are two switch interconnect ports between adjacent I/O bays.
These ports (17 and 18) are disabled by default. The ports must be manually enabled to use.
To install the switch:
1.
Remove the blank.
2.
Install the switch.
Accessing the switch
The switch is accessed remotely using the Ethernet ports or locally using the DB-9 management serial port.