HP HDX X16-1025NR HP HDX 16 Entertainment PC - Maintenance and Service Guide - Page 72
from the display inverter, and remove
View all HP HDX X16-1025NR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
26. If it is necessary to replace the display inverter, release the display inverter 1 as far from the display bezel as the backlight cables and display panel cable allow. ✎ Dual-lamp display assemblies will have two cables that must be disconnected in step 27. Single-lamp display assemblies will only have one cable that must be disconnected. 27. Disconnect the backlight cables 2 and the display panel cable 3 from the display inverter, and remove the display inverter. The display inverter is available using the following spare part numbers: ❏ 496467-001-for use only with dual-lamp display assemblies ❏ 499317-001-for use only with single-lamp display assemblies Removal and replacement procedures 4-37
Removal and replacement procedures
4–37
26. If it is necessary to replace the display inverter, release the display inverter
1
as far from the display bezel as
the backlight cables and display panel cable allow.
✎
Dual-lamp display assemblies will have two cables that must be disconnected in step 27. Single-lamp display
assemblies will only have one cable that must be disconnected.
27. Disconnect the backlight cables
2
and the display panel cable
3
from the display inverter, and remove the
display inverter. The display inverter is available using the following spare part numbers:
❏
496467-001—for use only with dual-lamp display assemblies
❏
499317-001—for use only with single-lamp display assemblies