HP HDX X16-1300 HP HDX 16 Entertainment PC - Maintenance and Service Guide - Page 77
from the LIF connector on the system board., Remove the top cover
View all HP HDX X16-1300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
7. Lift the rear edge 1 of the top cover until it rests at an angle. 8. Slide the top cover 2 back until the fingerprint reader board cable is accessible. 9. Disconnect the fingerprint reader board cable 1 from the LIF connector on the system board. 10. Remove the top cover 2. Reverse this procedure to install the top cover. Removal and replacement procedures 4-42
Removal and replacement procedures
4–42
7. Lift the rear edge
1
of the top cover until it rests at an angle.
8. Slide the top cover
2
back until the fingerprint reader board cable is accessible.
9. Disconnect the fingerprint reader board cable
1
from the LIF connector on the system board.
10. Remove the top cover
2
.
Reverse this procedure to install the top cover.