HP HDX18-1020US Memory Modules - Windows Vista - Page 7

on the hard drive cover with the notches on the computer., Align the tabs

Get HP HDX18-1020US - Pavilion Premium - Core 2 Duo 2.26 GHz PDF manuals and user guides
UPC - 884420403616
View all HP HDX18-1020US manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module, and do not bend the memory module. a. Align the notched edge (1) of the memory module with the tab in the memory module slot. b. With the memory module at a 45-degree angle from the surface of the memory module compartment, press the module (2) into the memory module slot until it is seated. c. Gently press the memory module (3) down, applying pressure to both the left and right edges of the memory module, until the retention clips snap into place. CAUTION: To prevent damage to the memory module, be sure that you do not bend the memory module. 11. Align the tabs (1) on the hard drive cover with the notches on the computer. 12. Close the cover (2). 13. Tighten the 5 hard drive cover screws (3). 14. Replace the battery. 15. Turn the computer right-side up, and then reconnect external power and external devices. 16. Turn on the computer. 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
CAUTION:
To prevent damage to the memory module, hold the memory module by the edges
only. Do not touch the components on the memory module, and do not bend the memory module.
a.
Align the notched edge
(1)
of the memory module with the tab in the memory module slot.
b.
With the memory module at a 45-degree angle from the surface of the memory module
compartment, press the module
(2)
into the memory module slot until it is seated.
c.
Gently press the memory module
(3)
down, applying pressure to both the left and right edges
of the memory module, until the retention clips snap into place.
CAUTION:
To prevent damage to the memory module, be sure that you do not bend the
memory module.
11.
Align the tabs
(1)
on the hard drive cover with the notches on the computer.
12.
Close the cover
(2)
.
13.
Tighten the 5 hard drive cover screws
(3)
.
14.
Replace the battery.
15.
Turn the computer right-side up, and then reconnect external power and external devices.
16.
Turn on the computer.
3