HP Integrity Superdome 2 32-socket HP Superdome 2 Partitioning Administrator G - Page 74
Local Boot, Considerations for Local Boot, Boot from local SAN
View all HP Integrity Superdome 2 32-socket manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Local Boot Up to 4 boot paths are supported per P2000 FC G3 array. • P2000 FC G3 array can support up to two dual port array controllers • Each controller supports up to two 8GB FC links Considerations for Local Boot • Minimum configuration ◦ One P2000 FC G3 can handle up to 4 partitions ◦ Boot paths are not redundant - You must shutdown HP Superdome 2 to update P2000 FC G3 firmware. • Optimal configuration ◦ Create redundant boot paths to separate dual controllers on the P2000 FC G3 - Would support only two partitions per array Boot from local SAN • HP Fibre Channel Switch(s) ◦ HP StorageWorks 8/24 Base SAN Switch (AM868A) is the default switch ◦ 8GB switches recommended • Considerations for Local SAN ◦ Minimum configuration: - For 16 or less partitions, one dual controller P2000 can be used ◦ Optimal configuration (Redundant boot paths) - Array must be configured to expose both the P2000 controllers to the partitions to allow P2000 firmware updates - The boot paths must be in separate switches and P2000 controllers. - Dual path connectivity allows the switch or array firmware updates without bringing SD2 down - For more redundancy or >16 partitions a second P2000 can be used Boot from External SAN An unlimited number of LUNs might be presented by an external SAN. 74 Booting and resetting Partitions (nPartitions and vPars)