HP Integrity Superdome 2 32-socket HP Superdome 2 Partitioning Administrator G - Page 28
Removing a Partition Specification
View all HP Integrity Superdome 2 32-socket manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
NOTE: The -Z option creates an nPartition from the PartitionSpec partition specification. • The following command modifies the alternate parspec named PartitionSpec to add a new blade in enclosure 1 slot 3 to the nPartition definition. parmodify -Z PartitionSpec -a blade:1/3 Removing a Partition Specification Use the following command to remove a parspec: parremove -Z PartitionSpec Saving the Current Configuration of nPartition and Switch to an Alternate Configuration To save your current configuration and switch to an alternate configuration, complete the following steps: 1. parmodify -p 1 -c Saved_Config 2. poweroff partition 1 3. parremove -p 1 4. parcreate -Z Alt_Config Viewing Partition Specification Using the OA GUI To view a partition's parspec name on the OA GUI, complete the following steps: 1. Launch the OA GUI. 2. Select an nPartition. 3. Click Modify nPartition. Figure 3-2 "Viewing Partitition Specification Information" shows the window with the Partition Specification Name. Figure 3-2 Viewing Partitition Specification Information 28 Getting Started with nPartitions