HP Integrity Superdome 2 8-socket HP Superdome 2 Partitioning Administrator Gu - Page 41
Assigning Adding Blades and I/O Bays to an nPartition Using the OA CLI, modify nPartition
View all HP Integrity Superdome 2 8-socket manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Assigning (Adding) Blades and I/O Bays to an nPartition This section describes the procedure to assign blades and I/O bays. Assigning (Adding) Blades and I/O Bays to an nPartition Using the OA CLI The syntax for adding a blade is: parmodify -p -a For more information, see help parcreate and help parmodify. The following command adds the blade in enclosure 1, slot 3 to the existing nPartition 2. parmodify -p 2 -a blade:1/3:base:y:ri:50% The syntax for adding an I/O bay is: parmodify -p -a io:iobay_path :[use_on_next_boot][:failure_usage] For more information, see the OA help, help parcreate and help parmodify . The following command adds I/O bay 1 in enclosure 6 to the existing nPartition 2. parmodify -p 2 -a io:6/1: Assigning (Adding) Blades and I/O Bays to an nPartition Using the OA GUI To assign blades and I/O Bays to an nPartition using the OA GUI, complete the following steps: 1. Select the nPartition from the left navigation pane and click modify nPartition. 2. Expand the Blade Resources option. Figure 5-3 "Blade Resources Option" shows the blade resource screen. Figure 5-3 Blade Resources Option 3. Select the blade resources that you want to assign to the nPartition. 4. Expand the IOX Resources option. Figure 5-4 "IOX Resources Option" shows the IOX Resources screen. Assigning (Adding) Blades and I/O Bays to an nPartition 41