HP Integrity Superdome 2 HP Integrity Superdome 2 Onboard Administrator User G
HP Integrity Superdome 2 Manual
View all HP Integrity Superdome 2 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Integrity Superdome 2 manual content summary:
- HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 1
HP Integrity Superdome 2 Onboard Administrator User Guide Abstract This user guide provides information on the initial setup and operation of the HP Integrity Superdome 2 Onboard Administrator, including installation Onboard Administrator modules, and it also covers use of the Onboard Administrator - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 2
HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP license. Microsoft, Windows, and Windows Server are U.S. registered trademarks of Microsoft Corporation - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 3
online help...16 Changing enclosure and device configurations 17 Recovering the administrator password 17 2 HP Integrity Superdome 2 Insight Display 18 HP Integrity Superdome 2 Insight Display components 18 Insight Display overview...18 Running the Insight Display installation 19 Navigating - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 4
screen...66 Enclosure DVD Module screen 68 7 Configuring HP Integrity Superdome 2 compute enclosures and enclosure devices...70 Viewing Onboard Administrator Module 88 Active Onboard Administrator screen 88 Active Onboard Administrator Status and Information tab 89 Active Onboard Administrator - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 5
TCP/IP Settings for Standby Onboard Administrator 100 Standby Onboard Administrator Virtual Buttons tab 100 Standby Certificate Request tab 100 Standby Onboard Administrator Certificate Upload tab 100 Device bays...101 Device Bay Overview screen 101 Device Bay Information - Bay xx screen 103 - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 6
the directory login solution 179 Troubleshooting LDAP on Onboard Administrator 179 15 Support and other resources 181 Before you contact HP...181 HP contact information...181 Subscription service...181 Documentation feedback...181 Installing HP Insight Remote Support Software 181 New and changed - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 7
Typographic conventions...182 Customer self repair...183 A Time zone settings 184 Africa time zone settings...184 Americas time zone settings 184 Asia time zone settings...186 Universal time zone settings 186 Oceanic time zone settings...187 Europe time zone settings...188 Polar time zone - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 8
and informs you of problems within the complex through email, SNMP, or the Insight Display. HP recommends that you read the HP Integrity Superdome 2 User Service Guide for complex specific information before proceeding with the Onboard Administrator setup. This user guide provides information on the - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 9
occurs when using redundant Onboard Administrators: • Removing an Onboard Administrator module in a Superdome 2 enclosure with a redundant Onboard Administrator module installed results in the other Onboard Administrator module immediately becoming the active Onboard Administrator if it was the - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 10
release, see the UPDATE FIRMWARE section in the HP Integrity Superdome 2 Onboard Administrator Command Line Interface User Guide. Access requirements To access the HP Superdome 2 Onboard Administrator web interface, you require the Onboard Administrator IP address and a compatible web browser. You - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 11
HP Integrity Superdome 2 blade enclosures. Component management begins after the component is detected and identified. The Onboard Administrator detects components in Superdome 2 enclosures through presence signals on each bay. When you insert a component into a bay, or connect an IOX, the Onboard - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 12
: For more information about partition creation and management, see the HP Integrity Superdome 2 Partitioning Administrator Guide. Interfaces Each Superdome 2 compute enclosure has several external management interfaces that connect the user to Onboard Administrator. The primary external management - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 13
or once to every server management processor or both), Onboard Administrator enables single-point access. Thus, the administrator can use single sign-on to log in to a single Onboard Administrator and use the web GUI to graphically view and manage the HP Superdome 2 components in the entire - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 14
user has DHCP and connects the Onboard Administrator management port to the DHCP server, then the Onboard Administrator modules and interconnect modules supporting and configured to use the Onboard Administrator static IP manually. For Superdome 2 server blades, you must connect to each server blade - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 15
set up for HP Superdome 2 Onboard Administrator. • The user name entered has problems signing in, contact your administrator. Running the setup wizard To run the setup wizard, log on to Onboard Administrator. The First Time Setup Wizard starts automatically when you log on to Onboard Administrator - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 16
the white question mark located at the top right of the screen under the header bar. Online help displays information related to the section of HP Superdome 2 Onboard Administrator that you are navigating. 16 Introduction - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 17
return to the Onboard Administrator GUI to make configuration changes at any time. See "Configuring HP Integrity Superdome 2 compute enclosures and enclosure devices" (page 70) for information that helps you make changes to enclosure and device configuration, user setup, and LDAP server settings and - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 18
2 HP Integrity Superdome 2 Insight Display HP Integrity Superdome 2 Insight Display components Item Description Function 1 Insight Display screen Displays Main Menu error messages and instructions 2 Left arrow button Moves the menu or navigation bar selection left one position 3 Right - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 19
the screen. • Amber- The Insight Display illuminates amber when the Onboard Administrator detects an error or alert condition. The screen displays the details verifies that no installation or configuration errors are present. If errors are present, the Insight Display guides you through the process - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 20
module is installed, the screen displays "Not Present." • Enclosure Name- The default setting is a unique factory-assigned name. The accepted character values are 0-9, A-Z ,a-z, -, _, and the box character. The box character is used to signal the end of the name. 20 HP Integrity Superdome 2 Insight - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 21
box character is used to signal the end of the name. • DVD Drive- The DVD connection Settings screen is a table of all the servers with the status of DVD Connection and continue. The installation wizard displays the Check: Installation and Cables screen. Running the Insight Display installation 21 - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 22
Onboard Administrator web interface and complete the Onboard Administrator First Time Installation Wizard. Navigating the Insight Display Navigate the menus and selections by using the arrow buttons on the Insight Display panel. The first menu displayed is the Main Menu: 22 HP Integrity Superdome - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 23
following menu options: • Health Summary • Enclosure Settings • Enclosure Info • Blade or Port Info • Turn Enclosure UID on/off • View User Note • Chat Mode If the active Onboard Administrator detects a USB key drive with any *.ROM , *.CFG or *.ISO files, a USB menu item appears at the bottom of the - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 24
, the Health Summary screen displays green. The bright green rectangles are components that are installed and on. A dark green rectangle represents a component that is installed, but powered off with no errors. A black rectangle represents an empty bay. 24 HP Integrity Superdome 2 Insight Display - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 25
no DVD drive is connected to the Onboard Administrator while a dark gray rectangle indicates the DVD drive is present, but that no media is present. A dark green rectangle indicates that media is present, but not actively connected to any server or that all connected servers have issued a disk eject - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 26
information about the enclosure, including: • Active OA IP address • Active OA Service IP address • Current health status of the enclosure • Current enclosure ambient temperature • Current ac input power to the enclosure • Enclosure name • Rack name 26 HP Integrity Superdome 2 Insight Display - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 27
blade, select Blade Info and press the OK button. To view the ports used by a specific server blade, select Port Info and press the OK button. The following screen shows a server blade with four embedded NICs. The other interconnect bays are empty. The four embedded NICs are connected to particular - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 28
the Main Menu turns off the rear enclosure UID LED and changes the color of the Insight Display screen to the current alert condition. 28 HP Integrity Superdome 2 Insight Display - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 29
16 characters. Use this screen to display helpful information such as contact phone numbers. Change this screen using the remote Onboard Administrator user a set of prepared responses, or dials in a custom response message on the ? line. To send a response back to the Administrator, navigate the - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 30
Cooling errors occur when too few fans are installed in the enclosure or when the existing fans are not installed in an effective configuration. Cooling errors can occur on server blades, storage blades, or interconnect modules. To correct a cooling error: 30 HP Integrity Superdome 2 Insight Display - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 31
server-specific user guide on the Documentation CD. Device failure errors Device failure errors occur when a component has failed. Device failure errors can occur on all components, including: • Server blades • Storage blades • Power supplies • Interconnect modules • Onboard Administrator modules - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 32
HP Superdome 2 SD2-16s complexes that are factory integrated ship with the HP Superdome 2 Door Status Display. The Door Display is a quick method of getting basic complex status information by using the integrated touch screen on the rack door. NOTE: HP Superdome 2 SD2-8s complexes do not support - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 33
NOTE: The start up menu will take several seconds to appear while the Door Display starts up. The start up menu has the following options: • Disable Display-If this option is selected, the Door Display screen immediately displays a screen saver. The screen saver displays for one hour and then the - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 34
This menu selection does not set the complex configuration on the Onboard Administrator. To correctly set up the Door display, you must select enable or disable display of the IP addresses of the active Onboard Administrator and the complex service port. NOTE: The OA IP address is not displayed until - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 35
screen displays status information for only the lower SD2-16s complex in the rack. • Upper Complex-The Door Display screen displays information for only the upper SD2-16s complex in the rack. • Both Complexes-The Door Display screen displays status information for both SD2-16s complexes in the rack. NOTE - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 36
complex status information. IMPORTANT: If you enter an OA Administrator or OA Operator-level user name, all complex information is displayed and the Door Display used to set the enclosure UID. If you enter an OA User-level user name, all complex information is displayed, but the Door Display screen - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 37
• Complex name-The user-specified name of the address of the active Onboard Administrator. • Service IP address-The IP address of the complex service port. • Enclosure the UID control overlay. If the rack contains two SD2-16s complexes, the Door Display status menu displays the following buttons: - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 38
off. IMPORTANT: If you select this option, you must re-enter all setting information, such as user names and passwords before you can use the Door Display. • Calibrate Screen- If this option is for the Door Display. This occurs if the OA web server is disabled. 38 HP Superdome 2 Door Status Display - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 39
the Door Display module only. IMPORTANT: You must reboot the Door Display after the Onboard Administrator reboots. The Door Display does not function until you reboot the Door Display after the Onboard Administrator reboots. Press Exit Display Settings to return to the Door Display status menu - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 40
Not Now if you do not want to reboot the Door Display. The firmware update is not complete until the Door Display is rebooted. 40 HP Superdome 2 Door Status Display - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 41
and management, see the HP Integrity Superdome 2 Partitioning Administrator Guide. Before you begin Before running the First Time Setup Wizard, complete the following tasks: 1. Install the Onboard Administrator modules. 2. Connect the Onboard Administrator modules to the network. 3. Complete - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 42
and Language Options screen in your OS. 2. Select the Language tab. 3. Select Install files for East Asian Languages, and then click Apply. Enclosure Selection screen The setup. You can run scripts for multiple Onboard Administrators before leaving the current screen. 42 First Time Setup Wizard - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 43
is 256. Click Upload after entering the script file path. • URL: Enter an http:// path to the configuration file if it is located on a web server. The maximum number of characters in the file path is 256. Click Upload after entering the URL. A window appears displaying the results. If more than - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 44
the enclosure is installed The current date assigned to the enclosure Time hh:mm:ss (24-hour time) • hh is an integer from 0 to 23 • mm is an integer from 0 to 59 • ss is an integer from 0 to 59 The current time assigned to the enclosure Primary NTP Server where ### ranges from - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 45
the HP Integrity Superdome 2 User Service Guide for more information on connecting enclosures. Administrator Account Setup screen The Administrator Account Setup enables you to expose separate inputs for each selected Onboard Administrator. Box Password Password Confirm Full Name Contact PIN Code - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 46
Accounts screen The Local User Accounts screen displays the user accounts assigned to the Active Onboard Administrator and provides choices for adding, editing, and deleting accounts. • New: Click the New button to add a new user to the selected enclosure. A maximum of 30 user accounts can be added - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 47
added, select the appropriate boxes to grant access to servers and interconnect bays. For possible values and descriptions of each box, see "Managing users" (page 134). Enclosure Bay IP Addressing screen The Onboard Administrator EBIPA feature is intended to help you provision a fixed IP address - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 48
for accessing information directories. While LDAP is based on the X.500 standard, it is significantly simpler. LDAP supports TCP/IP, which enables applications to work independently of the server hosting the directory. Use the Directory Group screen to set directory access for the now selected - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 49
to log on using a local user account instead of a directory account. Box Possible value Description Directory Server Address where ### ranges The IP address or the DNS name or the from 0 to 255 or DNS name of the name of the domain of the directory service directory server or the name of the - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 50
present. Options for DHCP and static IP are supported. • Use DHCP for all Active Onboard Administrators: Get the IP address for the Onboard Administrator from a DHCP server. The Standby check box is shown only if there is a Standby Onboard Administrator in the enclosure. • Enable Dynamic DNS: Enable - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 51
For possible values and descriptions of each box, see "SNMP Settings screen" (page 84). SNMP Settings screen 51 - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 52
or change the redundancy mode setting in the Onboard Administrator to restore Power Subsystem status. One upper and one lower power supply must always be installed and operational. See the Insight Display for corrective steps. The Superdome 2 enclosure power management system enables you to - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 53
power supplies can be installed with one upper and one supported for low voltage on the Superdome 2 enclosure. Finish You can clear the Do not automatically start this wizard again check box to force the First Time Setup Wizard to run again the next time a user signs into the Onboard Administrator - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 54
Click the Finish button to save and exit the First Time Setup Wizard. The First Time Setup Wizard screen closes and you are returned to the default main screen of the Superdome 2 Onboard Administrator. 54 First Time Setup Wizard - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 55
Onboard Administrator Navigation overview The main HP Superdome 2 Onboard Administrator navigating individual compute enclosure devices, connected IOXs and functions for all complex compute user permissions, device availability, and device status. If a user is configured to be an Operator or User - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 56
view in the right frame of the GUI. Individual device pages contain detailed information on the selected device and other device-related functions. 56 Navigating Onboard Administrator - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 57
the graphical view. Links to system forms do not display status icons. Graphical view navigation The second component of the HP Superdome 2 Onboard Administrator GUI navigation system is a graphical representation of physical enclosures, called the graphical view. The graphical view consists of two - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 58
views are both affected by user permissions, security on the graphical view is handled differently from the left tree view. If the user does not have the permissions to access a device, a blank bay appears regardless of whether a device is present in that bay, 58 Navigating Onboard Administrator - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 59
locked to the current user. The user cannot select a locked bay. When the user hovers the mouse over the locked bay, a message appears, indicating that the user does not have useful when viewing the Onboard Administrator on a small monitor or on a monitor with low resolution. Navigation overview 59 - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 60
6 Complex Overview Complex Overview screen The Complex Overview screen displays a graphical representation of each compute enclosure in the complex, called the graphical view. The graphical view consists of a front view and a rear view of each enclosure. When you mouse over a device in the graphical - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 61
This information is displayed only for compute enclosures. It does not include IOXs. Table 2 Compute enclosure cooling requirements Item Current BTU/hr Max BTU/hr installed blade devices. If no blade devices are installed, then this box displays the temperature of the Onboard Administrator module - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 62
, OK, Degraded, or Critical Error. Power Mode A user setting to configure the enclosure dc power capacity and the input supplies or change the redundancy mode setting in the Onboard Administrator to restore Power Subsystem status. See the Insight Display IOX in the complex. 62 Complex Overview - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 63
values are Unknown, OK, Degraded, and Failed. The overall health of the CAMNET fabric in the complex. Possible values are Unknown, OK, Degraded, and Failed. The health information about each compute enclosure and IOX in the complex beneath the overall status table. Complex Information screen 63 - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 64
the IOX. Possible values are Unknown, OK, Degraded, and Failed. Information tab The Information tab provides general information about the complex and an input box to change the Complex Name. Item Product Name Manufacturer 64 Complex Overview Description Common descriptive name of the Superdome - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 65
Serial Number The unique manufacturer serial number of the Superdome 2 complex Universal Unique Identifier The Universally Unique Identifier number number of compute enclosures in the complex Number of IOXs The total number of IOXs in the complex Complex Firmware Version The now configured - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 66
now installed version of the firmware on the device Each partition in the HP Integrity Superdome 2 Onboard Administrator Command Line Interface User Guide. The Firmware Update screen enables you to update the firmware for all FRUs in the complex or to update the firmware for individual partitions - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 67
complex. FRUs with mismatched firmware FRUs within the complex that have mismatched firmware bundle versions now installed are listed individually. Item FRU Enclosure Bay Installed Version Description Common descriptive name of the FRU with mismatched firmware. The compute enclosure that contains - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 68
initial installation. To use the DVD drive, an administrator must first connect the DVD module to any or all partitions through the Onboard Administrator CLI or by navigating to the Complex nPartitions menu and selecting the Virtual Devices tab. For more information, see the HP Integrity Superdome - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 69
Product Name Manufacturer Serial Number Part Number Spare Part Number Engineering Date Code Description Current status of the DVD module. Possible if the data is not present or not readable by the Onboard Administrator. Power Allocation Request There is insufficient power to adequately power the - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 70
HP Superdome 2 Onboard Administrator Status and Standby HP Superdome 2 Onboard Administrator Status are similar to the Overall Enclosure Status and display a status for the Onboard Administrator. If a Standby Onboard Administrator HP Integrity Superdome 2 compute enclosures and enclosure devices - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 71
of the standby Onboard Administrator. Possible values are Absent, Unknown, OK, Degraded, and Failed. The power redundancy mode. Possible values are AC Redundant, Power Supply Redundant, Not Redundant, or Unknown. For information on these modes, see the HP Integrity Superdome 2 User Guide. Enclosure - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 72
Onboard Administrator. Device Operational Possible values are OK or Error. View the syslog for errors. Possible reasons for the error are mismatched firmware or a software or hardware failure. Device Indictment Indicates if the device has been indicted by the Superdome 2 Analysis Engine. Table - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 73
NOTE: If any subsystem contains a component with a status other than OK, all components of that subsystem with a status other than OK are displayed inline. Enclosure Information tab Item Part Model Manufacturer Serial Number Description The general description of the enclosure component The model - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 74
installed and the underscore (_) 0 to 32 AlertMail screen AlertMail enables users to receive system server settings are correct. 2. Select the Send Test AlertMail button. 3. To confirm that the test completed successfully, verify the recipient email account. 74 Configuring HP Integrity Superdome - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 75
Onboard alphanumeric characters and the dash Administrator resides (-) where ### ranges An IP address for the SMTP server from 0 to 255 1. Select the Enable AlertMail check box to enable the AlertMail feature standard format Subject: HP AlertMail-SEQ: SUBJECT To: RECEIVER - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 76
a message in the system log when power delay has completed after the longest power delay has passed. The HP Superdome 2 Onboard Administrator factory default setting is to disable power delay for all components. 76 Configuring HP Integrity Superdome 2 compute enclosures and enclosure devices - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 77
feature include: • Boot from network: Network interconnects must complete power on self test prior to servers powerdelay for this bay. HP Superdome 2 Onboard Administrator grants power to this bay 3600 seconds. If double dense C-class server blades are installed in an enclosure the power delay - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 78
of the device. The type of device in the bay, or Absent if no device is installed in the bay Enables power sequencing, disables power sequencing, or does not allow powering on of The time zone assigned to the enclosure 78 Configuring HP Integrity Superdome 2 compute enclosures and enclosure devices - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 79
is for enclosures with an active and standby Onboard Administrator. When the standby Onboard Administrator takes over the role of the active Onboard Administrator, the Onboard Administrator assumes the IP address of the previous active Onboard Administrator. This ensures the Enclosure IP Mode IP - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 80
by default. Deselecting this check box disables Secure Shell connections to the Onboard Administrator. Secure Shell is disabled when Two-Factor Authentication is enabled. Disabling Two-Factor Authentication does not 80 Configuring HP Integrity Superdome 2 compute enclosures and enclosure devices - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 81
Onboard Administrator and other HP management tools such as HP Systems Insight Manager. To display the information that is shared by the Onboard Administrator data on the GUI log on page prevents unauthenticated users from viewing additional information. To prevent additional information from - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 82
the Onboard Administrator Service IP address as displayed in the enclosure Insight Display on the Enclosure Info screen. 3. Log into the Onboard Administrator as Administrator, and use the administrative password attached to the active Onboard Administrator. 82 Configuring HP Integrity Superdome - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 83
and the interconnect module management port in Interconnect bay #7 is set to 16.200.139.57. Knowing your network configuration before setting up EBIPA ensures an easy setup and enables you to install your HP Superdome 2 Onboard Administrator on to your network quickly. Record Enclosure settings 83 - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 84
Subnet Mask Gateway Domain DNS Server 1 DNS Server 2 DNS Server 3 Possible value Description where installed in the device bay. SNMP Settings screen The Onboard Administrator supports SNMP Onboard Administrator SNMP system can be enabled and configured. 84 Configuring HP Integrity Superdome - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 85
(_), and to read information, but not to manipulate the the space alerts or status of the HP Superdome 2 Onboard Administrator through SNMP. The default community name is "public" and enables a user to receive notification traps and alerts, but not to change or manipulate the status. 0 to 20 - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 86
contain any user passwords. You can manually edit the script to add the user passwords after the user name on the ADD USER lines. The enclosure Administrator account password be added from the configuration script. 86 Configuring HP Integrity Superdome 2 compute enclosures and enclosure devices - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 87
in contacting HP Customer Service for troubleshooting, repairing, and ordering replacements. The information is organized in tabular format and divided into subcategories within the Device Summary section: • Enclosure • Onboard Administrator • Blade • Blade mezzanine • Interconnect • XFM - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 88
does not appear. Onboard Administrator Module Active Onboard Administrator screen The Active Onboard Administrator screen under the Status and Information tab, has tables that provide detailed information about your Onboard Administrator. 88 Configuring HP Integrity Superdome 2 compute enclosures - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 89
the enclosure. Possible values are Unknown, OK, Degraded, and Failed. Active or Standby. The physical bay number where the Onboard Administrator is installed. The temperature of the enclosure in degrees Fahrenheit. The temperature at which the enclosure reports a status of caution. The temperature - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 90
Cancel to exit without a change. Click the Toggle On/Off button to change the Onboard Administrator module UID LED. This button is useful in identifying a particular Onboard Administrator when there is more than one. 90 Configuring HP Integrity Superdome 2 compute enclosures and enclosure devices - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 91
TCP/IP Settings screen This screen displays the current enclosure TCP/IP settings for the active Onboard Administrator. To change these settings, select Click here to modify the TCP/IP settings. For information on modifying the TCP/IP settings, see "Enclosure TCP/IP - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 92
use by the Onboard Administrator. An SSL certificate is used to certify the identity of Onboard Administrator and is required by the underlying HTTP server to establish a secure certificate by the certifying authority. 92 Configuring HP Integrity Superdome 2 compute enclosures and enclosure devices - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 93
code that identifies the country where the Onboard Administrator is located. The state or province where the Onboard Administrator is located. The city or locality where the Onboard Administrator is located. The company that owns this Onboard Administrator. Optional data Item Contact Person Email - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 94
known by the web browser. The web browser compares the host name in the resolved web address to the name that appears in the The Onboard Administrator name that appears in the browser web address box. 94 Configuring HP Integrity Superdome 2 compute enclosures and enclosure devices - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 95
https://oa-001635.xyz.com, then the value must be oa-001635.xyz.com. Select Standby OA Host Name to include a request for a Standby Onboard Administrator certificate. Enter the information in the Standby Common Name (CN) box, which must be 1 to 60 characters in length. This selection appears only - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 96
to: • Use the Onboard Administrator URL for the server. • Request the certificate be generated in the RAW format. • Include the Begin and End certificate lines. Active Onboard Administrator Certificate Upload tab Upload certificates for use in a Superdome 2 Onboard Administrator in the following - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 97
• Enclosure Event 0x07: Administrator Rights Changed • Enclosure Event 0x08: Enclosure Shutdown Pending • Enclosure Event 0x09: Enclosure Topology Changed • Enclosure • Blade Event 0x107: Blade Device Fault • Blade Event 0x108: Blade Device Thermal Status Change Onboard Administrator Module 97 - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 98
Enclosure Event 0x1019: User Deleted • Enclosure Event 0x1020: User Enabled • Enclosure Event 0x1021: User Disabled • Enclosure Event 0x1201: Flash Pending • Enclosure Event 0x1202: Flash Started • Enclosure Event 0x1203: Flash Progress 98 Configuring HP Integrity Superdome 2 compute enclosures and - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 99
to save the settings. Standby Onboard Administrator screen When a second HP Superdome 2 Onboard Administrator is placed in the enclosure, it becomes the standby Onboard Administrator. The standby Onboard Administrator is normally placed in the available Onboard Administrator tray at the rear of the - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 100
93). Standby Onboard Administrator Certificate Upload tab The standby Certificate Upload tab is the same as it is for an active Onboard Administrator. For information on this tab, see "Active Onboard Administrator Certificate Upload tab" (page 96). 100 Configuring HP Integrity Superdome 2 compute - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 101
of the iLO within the server blade. NOTE: Not applicable for HP Integrity Superdome 2 server blades or storage blades. The status of the DVD connection to the server blade. A status of Incompatible Firmware means the DVD feature is not supported with the iLO firmware installed on the device. Device - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 102
on or off one at a time or as groups, depending on the checkboxes. Virtual Power NOTE: This menu is not available for HP Integrity Superdome 2 server blades or storage blades. Button Momentary Press Press and Hold Cold Boot Reset Description This button mimics a physical momentary press of the - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 103
: This menu is not present for HP Integrity Superdome 2 server blades. The iLO for the server blade in the device bay is available by clicking iLO. The server-generated iLO page appears, which is separate from Onboard Administrator. The Onboard Administrator provides a one-time login (login bypass - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 104
is no partner device. NOTE: Not applicable for HP Integrity Superdome 2 server blades. Diagnostic Information Diagnostic information is gathered by error displays if the data is not present or not readable by the Onboard Administrator. Status of the iLO. Possible values are OK or Error. Temperature - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 105
to the Virtual Connect Manager to configure the server blade profile. NOTE: Not applicable for HP Integrity Superdome 2 server blades. CPU Status Item Resource Path Status FRU Read Status Indictment Status Description The resource path for the processor socket. The overall status of the processor - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 106
the status of the temperature sensor. The status matches the graphic presentation of the temperature. Graphic presentation of temperature Device Bay Information tab 106 Configuring HP Integrity Superdome 2 compute enclosures and enclosure devices - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 107
installed server blade. NOTE: Not applicable for HP Integrity Superdome 2 server blades. ROM version number NOTE: Not applicable for HP Integrity Superdome 2 server blades. Currently configured complex firmware version NOTE: Not applicable for c-Class server blades. Currently configured partition - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 108
Engineering Date Manufacturing reference number Code Table 10 DIMM Information: CPU Socket 0 or 1 (for Superdome light on the server blade on (blue) or off (gray) for identification of the selected server blade. Interconnect bays HP Integrity Superdome 2 compute enclosures and enclosure devices - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 109
values are On or Off. Network interface type for the interconnect device installed in this bay. Possible values are Ethernet or fiber. Address where the an interconnect device on or off. HP recommends that only one device be turned on or off at a time using this feature. The UID State menu is - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 110
model name, part number, serial number, and other information used to identify the device. This data is also called FRU data. Device identification 110 Configuring HP Integrity Superdome 2 compute enclosures and enclosure devices - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 111
Device Degraded Interconnect Bay Information tab Description data error displays if the data is not present or not readable by the Onboard Administrator. Management processor is not responding. Possible values are OK or Error. Temperature is above the warning threshold. Possible values are OK - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 112
of the interconnect management interface. User Assigned Name A name assigned to the interconnect by the user. If supported, the name is assigned using the device of your choice from the Onboard Administrator GUI. 112 Configuring HP Integrity Superdome 2 compute enclosures and enclosure devices - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 113
Button Power Off Reset Toggle On/Off Description Clicking this button shuts the power off on the interconnect device. Clicking this button forces the interconnect device to power off and then power up again, performing a reset. Clicking this button turns the UID on the interconnect device on (blue) - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 114
values are On or Off. Engineering Date Code Manufacturing information about the XFM. Part Number Part number of the XFM used to order replacement parts of the same type. Product Name Common descriptive name for the XFM. 114 Configuring HP Integrity Superdome 2 compute enclosures and enclosure - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 115
Information on this page is current as of last download. Click the Refresh button to view updated information. UID State The UID State menu is used to set the UID LED on the XFM. Turning on the UID LED assists in locating a specific XFM within an enclosure. These LEDs can be turned on or off one at - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 116
was not requested by the Onboard Administrator. Possible values are OK or Error. Description Indicates the port on the XFM module. Current status of link to connected device. Possible values are OK, Error or Unknown. 116 Configuring HP Integrity Superdome 2 compute enclosures and enclosure devices - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 117
you to toggle the UID on the XFM of your choice from the Onboard Administrator GUI. Click the Toggle On/Off button to turn UID on the Engineering Date Code, part number, and product name. The check box in the first column on the top row toggles all checkboxes on or off for all GPSMs. This feature - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 118
bays where you want to apply the UID State features. Bay Bay in the enclosure of the corresponding GPSM Possible values are On (blue) or Off (gray). Engineering Date Code Manufacturing information about the GPSM. Part Number Part HP Integrity Superdome 2 compute enclosures and enclosure devices - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 119
Item Product Name Part Number Spare Part Number Serial Number Engineering Date Code Manufacturer Complex Firmware Version Description The common enables you to toggle the UID on the GPSM of your choice from the Onboard Administrator GUI. Click the Toggle On/Off button to turn UID on the GPSM on - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 120
numbers are not supported in the same enclosure. The Onboard Administrator identifies which power supplies must be replaced by displaying a caution icon. For proper installation of the power supplies into a compute enclosure, see the HP Integrity Superdome 2 Installation Guide. Power and Thermal - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 121
. Possible values are Unknown, OK, Degraded, or Critical Error. A user setting to configure the enclosure dc power capacity and the input power redundancy in the Onboard Administrator to restore Power Subsystem status. See the Insight Display for corrective steps. The HP Superdome 2 Enclosure - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 122
installed with Onboard Administrator, go to the menu on the left and select the enclosure to be managed, and then click Power and Thermal. The Enclosure Power Allocation page appears below. Click Enclosure Power Allocation to display the following information: 122 Configuring HP Integrity Superdome - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 123
and easy interpretation of the power situation for the enclosure. The power meter is useful for showing trends in power consumption and can assist in troubleshooting the power subsystem. Enclosure power management 123 - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 124
graph shows the power usage of the enclosure over the previous 24 hours. The Onboard Administrator collects power usage from the enclosure every 5 minutes. For each 5-minute period, the Cap reading from the enclosure. 124 Configuring HP Integrity Superdome 2 compute enclosures and enclosure devices - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 125
Power Cap is not supported on Superdome 2. Peak Power all the readings after the enclosure was powered on or the Onboard Administrator was reset. • Minimum Power Reading: This value represents the Page button. When you restart an enclosure, HP recommends waiting for 5 minutes and then refreshing - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 126
oldest date or oldest date to present date. The Show Values in box enables you to select between Watts, Btu/hr, and Amps. 126 Configuring HP Integrity Superdome 2 compute enclosures and enclosure devices - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 127
use in Superdome 2 compute enclosures All power supplies in one enclosure must have the same part number. The Onboard Administrator identifies which power Possible values are Unknown, OK, Degraded, or Critical Error. A user setting to configure the enclosure dc power capacity and the input power - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 128
Supply Information-Bay x screen, where x is the bay of the selected power supply. This screen provides status information on the selected power supply. 128 Configuring HP Integrity Superdome 2 compute enclosures and enclosure devices - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 129
; status was not requested by the Onboard Administrator. Possible values are OK and Error. Power Cord Input power status. Possible values are OK and Error. Device Indictment Indicates if the power supply has been indicted by the Superdome 2 Analysis Engine. Click the Refresh button to update - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 130
location rule indicates the proper location of the fans and the device bays that are supported. Fan status Column Fan Model Status Fan Speed Description The bay in the enclosure of information such as internal data 130 Configuring HP Integrity Superdome 2 compute enclosures and enclosure devices - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 131
errors, location errors, device failures, and device degradation. Fan speeds appear in RPMs. To update information on this page, click the Refresh button. Thermal Subsystem Fan Zones tab Fan zones monitor the bay cooling efficiency and the status of the bays the fans are configured to cool. The zone - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 132
132 Configuring HP Integrity Superdome 2 compute enclosures and enclosure devices - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 133
bays, XFM bays and interconnect bay components. 15 Fan Rule All fan bays are used to support a maximum of 16 devices in the device bays. This includes eight HP Integrity Superdome 2 server blades. Fan Information - Bay screen Selecting a specific fan opens the Fan Information-Bay x screen, where - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 134
Refresh button. For proper installation of the fans into the enclosure, see the HP Integrity Superdome 2 User Service Guide. Managing users Users/Authentication This section explains the levels of user rights recognized by the HP Superdome 2 Onboard Administrator and provides detailed procedures to - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 135
who must see the configuration of the HP Superdome 2 Onboard Administrator but do not require the ability to change settings. The privilege level approach of HP Superdome 2 Onboard Administrator to user permissions enables the maintenance of server blade bays. This approach operates according to - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 136
, including all printable characters 3 to 40 characters, including all printable characters The password associated with the user. The password associated with the user. This value must match the Password value. 136 Configuring HP Integrity Superdome 2 compute enclosures and enclosure devices - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 137
accounts can be added, characters, the dash (-), and the underscore (_) including the reserved accounts. The user names ALL (case-insensitive), ADMINISTRATOR (case-insensitive), switch1, switch2, switch3, switch4, switch5, switch6, switch7, switch8, ldapuser, nobody, vcmuser_ are reserved and cannot - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 138
account are ended (signed out). Privilege level change If a user account privilege level is changed, then all open sessions for that user account are terminated (signed out). The user must log on again after the privilege level change. 138 Configuring HP Integrity Superdome 2 compute enclosures - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 139
is enabled, a user must have a user certificate to log on to the Onboard Administrator. Users with administrator privileges can upload or map a valid certificate to a selected user. There are two methods for uploading certificates for use in HP Superdome 2 Onboard Administrator: • Paste certificate - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 140
also supports TCP/ directory directory server or the name of the service. domain 0 user when the user is trying to authenticate using directory services. Uploading a certificate You are not required to upload domain controller certificates. Superdome 2 Onboard Administrator HP Integrity Superdome - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 141
Upload tab Uppload an LDAP certificate to the Onboard Administrator to establish a trusted relationship with the LDAP server. You can upload a maximum of three certificates. Upload certificates for use in HP Superdome 2 Onboard Administrator in the following ways: • Paste certificate contents into - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 142
reports that the network service is not available as a secure SSL connection and the Onboard Administrator does not allow this type of connection. The administrator must identify a directory server that supports SSL connections or reconfigure the directory server to use SSL connections. Certificate - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 143
on Onboard Administrator because the user does not belong to any of the configured directory groups. Test Log This is a running log of the details associated with the tests that have run and the results of the tests. Directory Test Controls The user name and password are sent to the LDAP server for - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 144
Administrator • Only the Administrator, with Onboard Administrator Bays permission, can set the user privilege level. • Can perform all actions on the enclosure when Onboard Administrator , or other useful information. 144 Configuring HP Integrity Superdome 2 compute enclosures and enclosure devices - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 145
Bays All Interconnect Bays Selected Interconnect Bays Description Gives the user permissions for the Onboard Administrator bays and enables the user to see the fans and power supplies. If the user privilege level is Administrator, then All Device Bays and All Interconnect Bays are automatically - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 146
Bays Gives the user permissions for all the interconnect bays Selected Interconnect Bays Gives the user permissions for only the selected interconnect bays Click the Update Group button to save settings. SSH Administration screen 146 Configuring HP Integrity Superdome 2 compute enclosures and - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 147
. The key file must contain the Administrator name at the end of the public key. Each key is associated with the Administrator account. HP SIM Integration screen Superdome 2 Onboard Administrator supports SSO with trusted applications, such as HP SIM. This feature enables you to be logged in to - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 148
user must have a user certificate to log on to the Onboard Administrator. Users with administrator privileges can upload or map a valid certificate to a selected user. Upload certificates for use in HP Superdome 2 Onboard Administrator HP Integrity Superdome 2 compute enclosures and enclosure devices - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 149
methods for uploading certificates for use in HP Superdome 2 Onboard Administrator: • Paste certificate contents into the text box and click the Upload button. • Paste the web address of the certificate into the URL box and click the Apply button. Signed In Users This screen displays all the current - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 150
to Onboard Administrator management port to provide the multiple subnets and gateways on the management network. Use of different subnets to attempt to isolate iLO 3s and Onboard Administrator management is not complete isolation of those networks. 150 Configuring HP Integrity Superdome 2 compute - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 151
8 HP Integrity Superdome 2 IOX enclosures Each IOX enclosure in the complex can be selected from the left navigation tree. Clicking the IOX name opens the main status page of the IOX. The following tabs are available at the top of the main page: • Status • Information • Virtual Buttons IOX Enclosure - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 152
Product Name Enclosure Number Manufacturer Description The common descriptive name of the IOX enclosure. The number of the IOX enclosure configured by dipswitches on the IOX enclosure hardware. The name of the company that manufactured the IOX enclosure. 152 HP Integrity Superdome 2 IOX enclosures - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 153
of this type. Serial Number The unique serial number of the IOX enclosure. Engineering Date Code Manufacturing information about the IOX enclosure. Complex Firmware Version Now configured firmware version on the IOX enclosure. IOX Virtual Buttons tab Click the Toggle On/Off button to change - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 154
supply in the IOX enclosure. Power supplies available for use in IOX enclosures All power supplies in one IOX enclosure must have the same part number. The Onboard Administrator identifies which on the power subsystem and on each individual power supply. 154 HP Integrity Superdome 2 IOX enclosures - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 155
Onboard Administrator monitors up to 4 fans in the enclosure and adjusts fan speeds as necessary, based on thermal and power measurements. The performance of each fan is monitored, and Onboard Administrator reports any failures or warnings to the system log and HP SIM (when SNMP is enabled). IOX - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 156
fans. Possible values are Redundant or Not Redundant Ambient Temperature The temperature of the IOX enclosure in degrees Celsius and Fahrenheit. Fans Good The total number of fans functioning update information on this page, click the Refresh button. 156 HP Integrity Superdome 2 IOX enclosures - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 157
If a device is not present, the check box is disabled and the port cannot be viewed. The server blades are mapped to the interconnect bays in the following manner: Superdome 2 server blade • Embedded NICs 1 and 3 (ENET:1 and ENET:3) map to interconnect bay 1. • Embedded NICs 2 and 4 (ENET:2 and ENET - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 158
serial port must be used for Onboard Administrator lost password recovery. The Onboard Administrator serial port speed is fixed at 9600, N, 8, 1. For more information about the CLI, see the HP Integrity Superdome 2 Onboard Administrator Command Line Interface User Guide. 158 Using the CLI - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 159
information on the enclosure defaults for each setting, see the HP Integrity Superdome 2 Onboard Administrator Command Line Interface User Guide. Configuring Superdome 2 server blade iLO 3 IP addresses Each Superdome 2 server blade iLO 3 factory default configuration enables DHCP network settings - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 160
accessed from the OA GUI or directly using Secure Shell. The active Onboard Administrator does not support routing from the service port to an interconnect module management processor. However, if the interconnect module supports the serial connection to the OA, then the OA CLI CONNECT INTERCONNECT - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 161
and Onboard Administrator modules. This eliminates the need to manually • URL: If the configuration file is located on a web server, enter an http:// path to it. The maximum number of user passwords. You can manually edit the script to add the user passwords after the user name on the ADD USER - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 162
for the enclosure. USB Support This box appears when a USB key is detected in the Active Onboard Administrator USB port and configuration files user passwords. You can manually edit the script to add the user passwords after the user name on the ADD USER lines. The enclosure Administrator - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 163
, and so on. These errors are organized into the following categories: ◦ User Request errors ◦ Onboard Administrator errors • Soap interface errors: These signal internal problems with the actual gSoap service itself. • CGI application errors: These are errors reported by individual CGI processes - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 164
Manager already exists. 31 The submitted bay number is out of range. 32 The submitted IP address is not valid. 33 The submitted value is was not formatted correctly. 37 An error occurred while opening the Onboard Administrator's system log. 38 The NMI Dump failed for the submitted Troubleshooting - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 165
while accessing the connected user for the requested blade. RIBCL response. 102 Could not find the ending boundary in the RIBCL response. 103 Could not requested blade. 104 Could not locate a Primary NTP server. 105 You must set at least one (1) trusted Onboard Administrator error messages 165 - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 166
not present. 149 No redundant Onboard Administrator found. Cannot failover. 150 The user could not be authenticated. 151 Invalid parameter for setting blade one time boot. 152 Invalid parameter for setting the blade boot priority. 153 A blade boot device can only be listed once. 166 Troubleshooting - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 167
is not supported. 163 The upload to the specified URL failed. 164 The Onboard Administrator did not fail over. 165 The blade is in a powered off state. 166 Could not get the blade CPQ key. 167 The IP manager does not exist. 168 There is no SSH key installed. 169 There was a problem running the - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 168
create firmware image. 225 The Active and Standby Onboard Administrators already have the same firmware version installed. 226 The other Onboard Administrator's firmware version must be v2.10 or later for this feature to be available. 227 The requested user cannot be removed from iLO because it is - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 169
of GUIDs was or end with partitions for this system has been exceeded or the maximum number of blades has been assigned to this partition. 611 This operation cannot be performed on a running partition. 612 This operation cannot be performed unless the partition is running. Onboard Administrator - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 170
nPartition is not active 712 No specification exists for this vPar. 713 Exceeded user-defined maximum number of vPars for this nPartition. 714 Exceeded number of vPars supported by a single blade. 715 Exceeded number of vPars supported in this complex. 716 Unable to assign a resource to this - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 171
926 Partitioning operation was unsuccessful (complex firmware returned an error) 1001 Problem encountered when trying to retrieve GPSM info/status. 1002 The power request for an xbar was denied. 1003 You must be on the monarch Onboard Administrator. 1004 Management daemon encountered a problem with - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 172
seek in the image file. 10 Unable to resume session. 11 Insufficient privileges. Onboard Administrator factory default settings When resetting the HP Superdome 2 Onboard Administrator to factory defaults, the administrator password is not reset to factory default. It remains set to the password last - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 173
Onboard Administrator SNMP traps The HP Superdome 2 Onboard administrator supports the following SNMP traps. Trap ID 22001 22001 22003 22004 22005 22006 22007 22008 22009 22010 22011 22012 22013 22014 22015 22016 22017 22018 22019 - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 174
cpqRackMinorEAETrap cpqRackMajorEAETrap cpqRackCriticalEAETrap Description Blade inserted Error Analysis Engine Informational event Error Analysis Engine Degraded/Warning or Minor event Error Analysis Engine Major event Error Analysis Engine Critical or Fatal event 174 Troubleshooting - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 175
named OA Admins, and then put a user named Test Admin to this group 2. Create a group called OA Operators, and then add a user named Test Operator to this group. User permissions are irrelevant. Preparing the Onboard Administrator To prepare the Onboard Administrator: Certificate Services 175 - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 176
name forcing the DNS servers defined for the domain to offer DCs. For simplicity during initial setup, HP recommends you use a single IP address. The Search Context is standard LDAP format. For example, if the user accounts are in the Users OU in a domain named BLADEDEMO.HP.COM, the Search Context - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 177
4. Click the Details tab, and then click theCopy to File... button. 5. IMPORTANT: Select Base-64 encoded x.509 (.CER) from the list of export options. Click the Next button. 6. Provide a name and location for the file (c:\dccert.cer) and click the Finish button to complete the wizard. 7. Locate the - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 178
truncated... -----END CERTIFICATE----8. Return to the OA Upload Certificate screen, paste the certificate contents into the window, and then click the Upload button. Creating directory groups Onboard Administrator authenticates users and assigns privileges by first verifying that the user name and - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 179
, see "Troubleshooting" (page 163). NOTE: You cannot login using your user name. For example, if your Account name is Jeff Allen and your account is jallen, you cannot login as jallen because this format is not now supported by LDAP. 4. Log off or sign out of Onboard Administrator, and then - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 180
settings unique to your network (such as DNS) and that the time and date are correct (certificates are date sensitive). Be sure that Onboard Administrator can reach the DNS server (by pinging it from the Onboard Administrator CLI). If LDAP is enabled while booting into Lost Password mode, the local - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 181
of HP. Installing HP Insight Remote Support Software HP strongly recommends that you install HP Insight Remote Support software to complete the installation or upgrade of your product and to enable improved delivery of your HP Warranty, HP Care Pack Service or HP contractual support agreement. HP - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 182
information: • HP Integrity Superdome 2 Onboard Administrator Command Line Interface User Guide • HP Integrity Superdome 2 Partitioning Administrator Guide You can find these documents from the Manuals page of the HP Business Support Center website: http://www.hp.com/support/manuals Typographic - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 183
in personal injury or nonrecoverable system problems. CAUTION: A caution calls attention request HP to replace these parts, you will be charged for the travel and labor costs of this service. • call the HP Technical Support Center and a technician will help you over the telephone. HP specifies in - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 184
Time zones must be entered exactly as they appear. The following table provides the African time zone settings that are supported by the Onboard Administrator. Africa/Abidjan Africa/Accra Africa/Addis_Ababa Africa/Algiers Africa/Asmera Africa/Bamako Africa/Bangui Africa/Banjul Africa/Bissau Africa - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 185
America/Bogota America/Boise America/Buenos_Aires America/Cambridge_Bay America/Cancun America/Caracas America/Catamarca America/Cayenne America/Cayman America/Chicago America/Chihuahua America/Cordoba America/Costa_Rica America/Cuiaba America/Curacao America/Dawson America/Dawson_Creek America/ - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 186
zone settings NOTE: Time zones must be entered exactly as they appear. The following table provides the Universal time zone settings that are supported by the Onboard Administrator. CET CST6CDT EET EST EST5EDT Etc/GMT Etc/GMT-2 Etc/GMT+2 Etc/GMT-3 Etc/GMT+3 Etc/GMT-4 Etc/GMT+4 Etc/GMT+7 Etc/GMT - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 187
must be entered exactly as they appear. The following table provides the Oceanic time zone settings that are supported by the Onboard Administrator. Atlantic/Azores Atlantic/Bermuda Atlantic/Canary Atlantic/Cape_Verde Atlantic/Faeroe Atlantic/Jan_Mayen Atlantic/Madeira Atlantic/Reykjavik Atlantic - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 188
must be entered exactly as they appear. The following table provides the European time zone settings that are supported by the Onboard Administrator. Eire Europe/Amsterdam Europe/Andorra Europe/Athens Europe/Belfast Europe/Belgrade Europe/Berlin Europe/Bratislava Europe/Brussels Europe/Bucharest - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 189
iLO 3 IOX LDAP MAC MIB Partition Services module. Hypertext transfer protocol secure sockets. Interface adapter. Internet Control Message Protocol. Integrated Sockets Layer. Single sign-on. Serial, USB, video. Trivial file transfer protocol. User datagram protocol. Unit identification. Xbar Fabric - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 190
bays, power sequence, 76 diagnosing problems, 163 directory settings Directory Settings screen, 140 directory test settings, 141 display language, 41 DNS server, 100 document related documentation, 182 documentation HP website, 182 Door Display overview, 32 setup, 32 downloading files, 181 E EBIPA - HP Integrity Superdome 2 | HP Integrity Superdome 2 Onboard Administrator User G - Page 191
problem HP contact information, 181 Technical support, 181 testing, directory services, 141 testing, remote log, 99 Thermal subsystem fan zones tab, 131 thermal subsystem screen, 130 troubleshooting, 163 troubleshooting, firmware upgrade utility, 163 troubleshooting, Onboard Administrator, 179 U user
HP Integrity Superdome 2 Onboard
Administrator User Guide
Abstract
This user guide provides information on the initial setup and operation of the HP Integrity Superdome 2 Onboard Administrator,
including installation Onboard Administrator modules, and it also covers use of the Onboard Administrator GUI, the use of the
enclosure Insight Display, and the use of the Door Status Display. This document is for the person who installs, administers,
and troubleshoots servers and storage systems.
HP Part Number: AH337-9001A_ed3
Published: January 2011
Edition: 3