HP Integrity Superdome SX2000 HP Integrity Servers with Microsoft Windows Serv - Page 27
Set Cell Local Memory to 100% cell-based servers only, Using F8 from a headless console
View all HP Integrity Superdome SX2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
server's MP is 192.168.1.1. The default user name and password are Admin and Admin. Change the IP address and the default password at installation. For entry-level servers with iLO MPs, the MP is assigned a default DNS name at the factory and is DHCP enabled. It is not assigned a default IP address. The default host name can be deduced from the MP's MAC address. The host name is in the form mpMAC, where MAC is the 12-digit MAC code of the MP's NIC. The MAC address of the MP LAN interface is typically located on a sticker on the back of the server. • Set Cell Local Memory to 100% (cell-based servers only) HP recommends that you set the Cell Local Memory (CLM) parameter to 100% for optimal server performance. Use the hardware partition (npar) tool. • Using F8 from a headless console Pressing the F8 key when using a headless console does not work. When prompted to press the F8 key, you must press the Esc 8 key sequence instead. Press the 8 key within two seconds after pressing the Esc key. Otherwise, the system registers only the Esc key and reboots. Tips and Tricks 27