HP Integrity rx8620 Safety and Regulatory Information, Fifth Edition - HP Inte - Page 9

Safety and Regulatory Information Laser Safety Laser Safety NOTE Laser devices installed in this equipment must be certified as Class 1 Laser devices by the Regulatory Agency recognized by the country where the equipment is installed. NOTE If a Fibre Channel I/O card is present, the following laser safety statement applies. This product contains a laser internal to the Optical Link Module (OLM) for connection to the Fibre communications port. In the USA, the OLM is certified as a Class 1 laser product conforming to the requirements contained in the Department of Health and Human Services (DHHS) regulation 21 CFR, Subchapter J. The certification is indicated by a label on the plastic OLM housing. Outside the USA, the OLM is certified as a Class 1 laser product conforming to the requirements contained in IEC 60825-1:1993 and EN 60825-1:1994, including Amendment 11:1996. NOTE If a DVD is present, the following laser safety statement applies. This product contains a laser internal to the Digital Versatile Disc (DVD) housing. In the USA, the DVD is certified as a Class 1 laser product conforming to the requirements contained in the Department of Health and Human Services (DHHS) regulation 21 CFR, Subchapter J. The certification is indicated by a label on the DVD housing. Outside the USA, the DVD is certified as a Class 1 laser product conforming to the requirements contained in IEC 60825-1:1993+A1 and EN 60825-1:1994+A11. Chapter 1 7