HP J9650A Brochure - Page 2

Features and benefits Quality of Service (QoS) • IEEE 802.1p prioritization: delivers data to devices based on the priority and type of traffic • SpectraLink voice priority (SVP) support: prioritizes SpectraLink voice IP packets sent from a SpectraLink NetLink SVP server to SpectraLink wireless voice handsets to help ensure excellent voice quality • Wireless: - L2/L3/L4 classification: IEEE 802.1p VLAN priority, SpectraLink SVP, and DiffServ - Wi-Fi MultiMedia (WMM), IEEE 802.11e EDCF, and Service-Aware priority assigned by VSC - Maximum VoIP call capacity: 12 active calls on IEEE 802.11 a/b/g/n Connectivity • IEEE 802.3af Power over Ethernet (PoE) support: simplifies deployment and dramatically reduces installation costs by helping to eliminate the time and cost involved in supplying local power at each access point location • Auto-MDIX: automatically adjusts for straight-through or crossover cables on the Ethernet interface Mobility • Three spatial stream MIMO technology: - The latest in Wi-Fi technology allows for 450 Mbps of signaling per radio - More than a 50% increase in performance over any two spatial stream product • Beamforming: - Better coverage area • Network management: - Better performance at distances from the AP - Fully manageable using HP Manager and HP Mobility Manager - SNMP v2c, SNMP v3, MIB-II with Traps, and RADIUS Authentication Client MIB (RFC 2618) - Embedded HTML management tool with secure access (SSL and VPN) - Scheduled configuration and firmware upgrades from central server • Diagnostic: - Client event log records association, authentication, and DHCP events - Packet capture tool for Ethernet and IEEE 802.11 interfaces (PCAP format) - Data rate matrix Intrusion detection/prevention system (IDS/IPS) • Protection against rogue IEEE 802.11a/b/g/n access points and wireless clients: HP RF Manager and MSM415 RF Security Sensors continuously scan for detection, classification, and prevention of wireless threats on IEEE 802.11a/b/g and 802.11n wireless networks • Provides 24 x 7 detection, classification, and prevention capabilities: HP RF Manager and MSM415 RF Security Sensors continuously protect your wireless network from security threats • Bandsteering: - Steers wireless clients to the 5 GHz band for outstanding performance • Concurrent operation in the 5 GHz band: provides ability to run both radios in the 5 GHz band for best performance (E-MSM466 Only) • Antenna: - E-MSM430/460 embedded antenna: 4 dBi antenna at 2.4 GHz and 7 dBi antenna at 5 GHz - E-MSM466 external antenna: includes six RP-SMA connectors for attaching an external antenna to fit the deployment application - Two indoor ceiling mount antennas and two pole/wall mount indoor/outdoor antennas fit specific needs - Maximum power listed doesn't include the embedded antenna; review HP documentation for your AP to understand the maximum output setting for your AP based on your country limit • Anywhere, anytime wireless coverage: - Dual-radio IEEE 802.11a/b/g/n and 802.11a/n access points - Per-radio software-selectable configuration of frequency bands - Self-healing, self-optimizing local mesh extends network availability - Wi-Fi Alliance Certified for interoperability with all IEEE 802.11a/b/g/n client devices - IEEE 802.3af PoE • Medical standards: meets the European EN60601-1-2 standard for healthcare 2