HP KA460UT Installing Windows XP Professional x64 on the HP Compaq 8510w and 8 - Page 3
Installing the operating system and system hardware - manual
UPC - 883585836567
View all HP KA460UT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Note: You can download HP drivers and utilities, including the most current available ROM for the platform, from the HP website www.hp.com. Installing the operating system and system hardware Preparing for installation IMPORANT: Follow the installation instructions in the order provided. Failure to complete these steps in the proper order can result in an unsuccessful or unstable installation. This section provides guidelines for users who perform a clean installation of Microsoft Windows XP Professional x64. Installing drivers and enhancements Perform the following steps before manually installing Windows XP Professional x64: 1. Change the boot order in F10 Setup to make the optical drive the first boot device. 2. Disable SATA Native Mode in F10 Setup (see appendix A). 3. Boot with the Windows XP Professional x64 OS CD in the drive and follow the on-screen instructions for installation. Note: Contact the Network Administrators to properly set up the networking components of Microsoft Windows XP Professional x64. For installation, refer to the Microsoft documentation provided with Windows XP Professional x64 for complete installation instructions. 4. Install the drivers and enhancement versions listed in Table 1 from the HP website at www.hp.com. See Table 1 for additional information. Note: The versions listed in the white paper have been tested with Microsoft Windows XP Professional x64. Use of versions not listed in the white paper may result in anomalous behavior. Page 3