HP LE2001w HP LE1851w, LE2001w, and LE2001wm LCD Monitors - Page 18
CAUTION, Installing the Monitor on a Swing Arm
View all HP LE2001w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
4. To attach the monitor to a swing arm, insert four 10mm screws through the holes on the swing arm plate and into the mounting holes on the monitor. Figure 3-8 Installing the Monitor on a Swing Arm To attach the monitor to other mounting fixtures, follow the instructions included with the mounting fixture to ensure that the monitor is safely attached. CAUTION: This monitor supports the VESA industry standard 100 mm mounting holes. To attach a third-party mounting solution to the monitor, four 4 mm, 0.7 pitch, and 10 mm long screws are required. Longer screws must not be used because they may damage the monitor. It is important to verify that the manufacturer's mounting solution is compliant with the VESA standard and is rated to support the weight of the monitor display panel. For best performance, it is important to use the power and video cables provided with the monitor. 5. Reconnect the cables to the monitor panel. 10 Chapter 3 Setting Up the Monitor ENWW