HP LP2275w HP LP2275w and LP2475w LCD Monitors User Guide - Page 24
CAUTION, Removing the HP Quick Release from the Pedestal Base - panel type
UPC - 883585765317
View all HP LP2275w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
2. Remove the Quick Release from the pedestal base by removing the four screws. Figure 3-13 Removing the HP Quick Release from the Pedestal Base 3. Mount the Quick Release to a swing arm or other mounting fixture using the four screws removed from the Quick Release in the previous step. Figure 3-14 Installing the Quick Release CAUTION: The Quick Release can also be installed directly to a wall to mount the monitor panel. It is designed to support a maximum of up to 10.9 kg (24 lbs). If you are mounting to a wall, HP recommends that you consult with a qualified engineering, architectural, or construction professional to determine the appropriate type and quantity of mounting fasteners required for your application and to ensure that the mounting solution is properly installed to support applied loads. 18 Chapter 3 Setting Up the Monitor