HP LP2480zx HP LP2480zx LCD Monitor User Guide - Page 33

Table 4-2 OSD Menu (continued) Icon Main Menu Submenu Description Horizontal OSD Position Changes the viewing position of the OSD menu to the left or right area of the screen. The factory default range is 50. Vertical OSD Position Changes the viewing position of the OSD menu to the top or bottom area of the screen. The factory default range is 50. Function Control Selects the operation of the front panel Function button. The options are Color Space, Brightness, Color Temp, Reset to Last, Black Level, OverDrive, Custom Scale, Crop (L-C-R), and PIP Control. Monitor Status Message Disables or enables the Power-On Status Display and selects the position the OSD message is displayed on the screen. Warning Messages Enables or Disables OSD recommendation messages. Calibration Limit OSD Button Labels Mode Display OSD Transparency Sets the limit (in backlight hours) for the calibration message. The range is 0 to 5,000 hours. The factory default is 1000 hours. A value of 0 disables the timer. The number of backlight hours since the last calibration is also displayed. Disables or enables the front panel button label display on the screen. Disables or enables the mode display information that is displayed on the bottom of the main menu. Adjust to view the background information through the OSD. Video Input Control Information OSD Timeout OSD Rotation DVI-1 Analog/Digital DVI-2 Analog/Digital HDMI DisplayPort Component S-Video Composite Input Auto-Switching Sets the time duration in seconds that the OSD is visible after the last button is pressed. The range is 10 - 60 seconds. The factory default is 40 seconds. Rotates the OSD menus and messages to support the monitor's Pivot feature. The choices are 0 and 90 degrees. Provides a menu of the input options. The default input selection is DVI-I 1. Selects DVI-I 1 as the primary video input. This input accepts either analog or digital signals. Selects DVI-I 2 as the primary video input. This input accepts either analog or digital signals. Selects HDMI as the primary video input. Selects DisplayPort as the primary video input. Selects Component as the primary video input. Selects S-Video as the primary video input. Selects Composite as the primary video input. Enables or disables the monitor automatically switching to an active input if the current signal is inactive. The factory default is Enabled. Selects and displays important information about the monitor. Current Settings Provides the current input video mode. Adjusting the Monitor Settings 27