HP LaserJet 3200 HP LaserJet 3200m All-in-One Product - (English for UK) Getti - Page 29
Connecting power and testing, Connecting power
View all HP LaserJet 3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Connecting power and testing Connecting power Make sure the power switch is in the "off" position before you connect the power cord. 1 To connect the product power cord CAUTION Use the power cord that came in the product box. Using a different power cord can damage the product. 3 1 Connect the power cord to the connector on the back of the product. 2 Plug the other end into a grounded power strip or wall outlet. 3 Turn the power switch to the "on" position. Note After you complete step 3, the product begins an internal self-test. If you plug the product into a power strip that has an on/off switch, make sure that the power strip is turned on at all times. The product cannot receive faxes if it is without power. Check your work #6 After you connect the power cord, does READY appear on the control panel display? EN Connecting power and testing 27