HP LaserJet 9000 Service Manual - Page 66

Embedded Jetdirect submenu (HP LaserJet 9040n/9050n and 9040dn/9050dn only) Item TCP/IP Options Values Explanation ENABLE ON OFF Enable the TCP/IP protocol. Disable the TCP/IP protocol. HOST NAME An alphanumeric string, up to 32 characters, that identifies the device. This name is listed on the Jetdirect configuration page. The default host name is NPIxxxxxx, where xxxxxx is the last six digits of the LAN hardware (MAC) address. CONFIG METHOD BOOTP Use BootP (Bootstrap Protocol) for automatic configuration from a BootP server. DHCP Use DHCP (Dynamic Host Configuration Protocol) for automatic configuration from a DHCP server. If selected and a DHCP lease exists, DHCP RELEASE and DHCP RENEW menus will be available to set DHCP lease options. AUTO IP Use automatic link-local IP addressing. An address in the form 169.254.x.x will be automatically assigned. MANUAL Use the MANUAL SETTINGS menu to configure TCP/IP parameters. DHCP RELEASE The current DHCP lease along with the leased IP address are released. DHCP RENEW NO (default) The print server does not request to renew the DHCP lease. YES The print server requests to renew the current DHCP lease. MANUAL SETTINGS IP ADDRESS The unique IP address of the printer. SUBNET MASK The subnet mask for the printer. SYSLOG SERVER The IP address of the syslog server that receives and logs syslog messages. DEFAULT GATEWAY The IP address of the gateway or router used for communications with other networks. IDLE TIMEOUT The time period, in seconds, after which an idle TCP print data connection is closed (default is 270 seconds). 50 Chapter 3 Product configuration