HP LaserJet Enterprise M604 Trusted Platform Module - Installation Guide - Page 2

6 8 Locate the correct connector on the formatter. The outline of a white square the same size as the TPM is printed on the formatter and surrounds the connector and a hole in the formatter. NOTE: The letters AUX might not appear on some older boards. The location of the connector on your formatter might be different from the location shown. Reinstall the formatter into the printer or reinstall the formatter access cover. NOTE: It is recommended to secure the formatter with a Kensington Lock. The formatter location, appearance, access covers, and reinstallation procedures might vary depending on printer. If needed, refer to the product support page for your printer at www.hp.com/support for help. 9 7 Hold the TPM by the edges as shown and align the connector on the TPM with the connector on the formatter. Gently position the TPM on the connector on the formatter. Apply slow, steady, downward pressure. You will hear a click when the connectors are fully engaged. If the optional hard-disk drive (HDD) was not removed, skip this step. If the HDD was removed, reinstall it. If needed, refer to the product support page for your product at www.hp.com/support for HDD installation instructions. 10 2