HP M2727nf HP LaserJet M2727 MFP - Scan Tasks - Page 4

HP LaserJet M2727 MFP Series - Scan Make my scan look better How do I? Clean the scanner glass Steps to perform 1 Turn off the product, unplug the power cord from the electrical socket, and raise the lid. Dirty glass, from fingerprints, smudges, hair, and so on, slows down performance and affects the accuracy of special features such as fit-to-page and copy. 2 Clean the glass by using a soft cloth or sponge that has been moistened with nonabrasive glass cleaner. CAUTION: Do not use abrasives, acetone, benzene, ammonia, ethyl alcohol, or carbon tetrachloride on any part of the product; these can damage the product. Do not place liquids directly on the glass. They might seep under it and damage the product. NOTE: If streaks or other defects appear only on copies produced using the automatic document feeder (ADF), clean the scanner strip (step 3). It is not necessary to clean the scanner glass. 3 Clean the scanner strip by using a soft cloth or sponge that has been moistened with nonabrasive glass cleaner. 4 To prevent spotting, dry the glass by using a chamois or cellulose sponge. © 2007 Copyright Hewlett-Packard Development Company, L.P. 1 www.hp.com