HP ML330 Implementing Microsoft Windows Server 2003 with Service Pack 2 on HP - Page 24
Procedures for performing a new installation
UPC - 613326960790
View all HP ML330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Procedures for performing a new installation This section outlines the proper procedures to follow when performing a new (clean) installation of the Windows Server 2003 SP2 OS on ProLiant servers. To complete a Windows Server 2003 SP2 installation fully supported by HP, follow these steps when setting up the system. Read the following sequence completely before you begin. Part 1: Choose one of the available methods for installing Windows Server 2003 SP2 slip stream media CD-1 HP BladeSystem installation The ProLiant Essentials Rapid Deployment Pack is a server deployment product that facilitates the installation, configuration, and deployment of high-volumes of servers through a GUI-based console using either scripting or imaging technology. Especially designed for HP BladeSystem servers, but supporting all ProLiant servers, the Rapid Deployment Pack has advanced features that can detect and display server blades based on their physical rack, enclosure, and bay location. To install Windows Server 2003 SP2 on HP BladeSystem servers, HP recommends using Rapid Deployment Pack Version 1.40 (or later). All blade enclosures ship with a Foundation Pack which includes the Rapid Deployment Pack CD. The Rapid Deployment Pack CD contains all of the drivers, agents, and support software that the blade needs. Use the Rapid Deployment Pack CD with any deployment method chosen to install software on HP BladeSystem servers. For additional product information and usage instructions for Rapid Deployment Pack, visit www.hp.com/servers/rdp. Details about other deployment options can be found at the following locations: • For HP BladeSystem c-Class: http://h71028.www7.hp.com/enterprise/cache/316735-0-0-0121.html • For HP BladeSystem p-Class: http://h18004.www1.hp.com/products/servers/proliant-bl/pclass/documentation.html • For ProLiant BL e-Class (retired): http://h18004.www1.hp.com/products/servers/proliant-bl/eclass/deployment.html Manual installation To perform a manual installation: 1. Choose a supported system platform from Table 4. 2. Inspect the system to confirm that it conforms to the platform-specific configuration listed in Table 4. If necessary, update the system ROMs as specified Table 4. 3. Use the System Configuration Utility to configure the hardware for the server. See Table 10 to determine if this step is necessary for the server. 4. If the server uses any of the following Smart Array Controllers as the boot controller, configure the arrays by accessing the Option ROM Configuration for Arrays utility through the F8 key during boot: • Smart Array P600 • Smart Array 642 • Smart Array 641 24