HP ML350 HP ProLiant ML350 G6 Server Maintenance and Service Guide - Page 45
Media bay blank
View all HP ML350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
5. Push the release latches on the expansion board retainer, and then open the retainer. 6. Remove the T-15 Torx screw securing the expansion board, if necessary. 7. Remove the expansion board. To replace the component, reverse the removal procedure. Media bay blank To remove the component: 1. Open or remove the tower bezel ("Front bezel" on page 28). Removal and replacement procedures 45
Removal and replacement procedures
45
5.
Push the release latches on the expansion board retainer, and then open the retainer.
6.
Remove the T-15 Torx screw securing the expansion board, if necessary.
7.
Remove the expansion board.
To replace the component, reverse the removal procedure.
Media bay blank
To remove the component:
1.
Open or remove the tower bezel ("
Front bezel
" on page
28
).