HP ML530 Performing an HP ProLiant server NMI crash dump - Page 5
Under Microsoft Windows, the Advanced tab of the System Control Panel applet.
UPC - 720591250669
View all HP ML530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Under Microsoft Windows Obtain the appropriate software as depicted in Table 2 before proceeding to the crash dump procedures. Table 2. Prerequisites Microsoft operating system HP software Option 1 Microsoft Windows 2000 with Service Pack 4 or later ProLiant Support Pack (PSP) for Microsoft Windows 2000 Option 2 Microsoft Windows Server 2003 with Service Pack 1 or later ProLiant Support Pack (PSP) for Microsoft Windows Server 2003 Option 3 Microsoft Windows Server 2003 x64 Edition ProLiant Support Pack (PSP) for Microsoft Windows Server 2003 x64 Edition NOTE: Use either the PSP version that shipped with the ProLiant server or a later version from the HP website. To generate a crash dump after an NMI: 1. Install a supported Microsoft Windows operating system, as directed by the onscreen directions. NOTE: For optimal functionality, HP highly recommends installing the PSP to obtain the appropriate system management driver, after operating system installation completes. This is an optional step since the system management driver is not required for the NMI functionality to work. 2. Enable the write debugging information option under the Startup and Recovery properties page in the Advanced tab of the System Control Panel applet. 3. Set the Windows registry: To enable NMI Crash Dump: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\CrashControl\NMICrashDump = (DWORD)1 To disable NMI Crash Dump: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\CrashControl\NMICrashDump = (DWORD)0 WARNING: Before making changes in the Registry, HP recommends that you make a copy of the system settings. This will allow you to restore the system settings if there are errors. 5